HONDA BENLY e2

vey good and beautiful. 혼다 슈퍼커브에 맞는 탑박스를드디어 찾았다. 나의 용도에 아주 적합하며 설치또한 간단하다 굉장히 마음에 드는 제품이며 가볍고 튼튼하다 게다가 자물쇠가 있어서 더욱 마음에 든다 좋은 제품이다View Detail

We had been using the standard IrisBOX from Homesense Box with a HondaOEM Bracket, but we have now converted it to a HondaOEM SteelLuggage BoxWhite!
The system was installed vertically with the Honda OEM Bracket that had been used up to this point.
The overall fit is very nice and cohesive. If it were possible to mount it just 5cm further back in the passenger position, it would give me more freedom of position;
Material:Compared to plastic boxes, steel boxes are more rigid in the key area, and the sense of security is much higher.
The only drawback, however, is that it is heavier than a box from a hardware store because it is made of Steel.
RubberSponge was applied to the back of the lid to prevent flapping, and a plastic chain was attached to prevent damage to the hinge as the lid opens to its full extent. We also used PunchCarpet for the inner lining to prevent the baggage from wounding and to prevent vibration.View Detail

[How is it used?
Just got my SUPER CUB for my commute! I bought the box as I thought it was essential to improve the convenience because I use it as my daily assistance.


Was the one you received as per Image?
I decided to use the White color box and it turned out to be a very cute Style with the perfect color for the Yellow color CUB.


Was the installation difficult?
I think it would have been very easy if it was a dedicated (compatible) Attachment because the holes for Bracket installation are already there.
I used a different Mounting Attachment, so it was Large odd to drill the holes in the right position for it.


How was your experience with it?
It's very convenient because the Helmet fits in the size! It's nice not to have to worry about loading when shopping on the way home from work.
When you open and close the lid, it makes a loud clunking sound, which is probably due to the Material, so that's a little annoying.
I am a little cautious when parking my bike at night.


[Included Parts:were they on?
It came with two keys. One is kept at home as a spare.


[Was there anything that disappointed you?
From what I've heard from people who have already used them, they will eventually rust.
After getting wet in the rain, I have to wipe off the water properly without being a bother.


Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer

Here's an impression of the Attachment I used for the install↓
https://imp.webike.net/article/502319/View Detail

I keep my rain rain jacket, tools, insurance policy, etc. After all, the CUB has "RearBOX. looks good on you! I installed it right after I bought the CUB. It is easy to make the mounting holes because it is made of plastic. The key is also attached, so theft prevention is a little safer!View Detail

Color:Painted in Gray and installed. Plenty of room even with the Jet helmet.View Detail

This was the very first part I installed after purchasing the Motorcycle.
Because the Holder of OEM was not easy to use, I put Helmet, but it is a sufficient capacity because it enters completely.
It has a one-touch key and is easy to use. The intrusion of rain is also almost impossible. Because there is a part of Gold for the hinge of the lid in the inside, if you are worried about the damage of the thing which puts it in, the measure is necessary. I used the remainder of the TileCarpet which I put down, and took measures.
For installation, an electric drill is required because of the hole drilling process of the box. Also, when installing with the carrier still attached, it is a bit of a hassle to align the attachment when inserting it under the carrier and attaching it with the bolt from above.
Color:I painted the lid and put a cutting sheet on it, because it looks simple because it is only Gray.
The OEM mounting position was offset 60mm backwards to allow the backpack to collide.
The product is good for the price, and with a little modification, it is easy to use, so I feel it is a product with high cost performance.View Detail

I bought this box to install in the CUB110's rear carrier.

It looks good and tacky enough to suit CUB (lol).
After all, this size and color looks good on BUSINESS cars.

It has plenty of capacity, and there's still plenty of room to throw in a Helmet, Rain Wear, and a commuter bag.
It's a great option for enhancing the loading capacity of the CUB.View Detail

The capacity and usability of the Box itself is not bad
But the quality, or rather the paint is bad
The paint started peeling off in less than a year
Perhaps you haven't done the groundwork properlyView Detail

Installation will be completed in about 15 minutes if you get used to it, but maybe it's probably because everyone is a one-off work. Drill (Electrically powered if possible) Preparation is essential. Since the corner of the case hits the hip bone during use (I also wrote other people) We recommend you to fix as far back as possible. If it is a little buy it is too much loading. It is a product that feels Quality of ManufacturerOEM without rattling.View Detail

It installed in CROSSCUB 50.
Large I was worried that it would not be rubbed, but I was durable at Large at all..
With this, you can put the backpack on your back and Helmet, always on LineWear when parking. At first I was worried whether to sh sh 40 etc, but here is 58 L too so I was glad to make it here. I made it about 2 cm behind the original drilling place.
The Seat part in the back comes into hand, and it is easy even when stopping the Center.
It was really nice to purchase.
View Detail