HONDA XL125

About quality and texture, I can confirm that the quality is great and that the material used is steel for all parts of the joint link and is for a non sealed style chain.About the feeling of use, Perfect to have a spare joint link as a replacement as I tend to remove this link often for cleaning the chain and changing sprockets.Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a front drive sprocket and rear driven sprocket to your cart when purchasing a drive chain and joint link.Difficulty of installation, I can say the fitment of the joint link for my installation was very easy due to the simple process of connecting the drive chain ends with the joint link with open access to the swingarm area.Cost performance and comparison with other products, Pricing of this product is great, You receive a joint link made from quality materials. There are lower and higher priced options with the 428 pitch design available here.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

Second time purchase this grip for my another bike.Easy to replace, and it last long to use.Good for long touring riding use and less fatigure to hold with this grip ,and even not slippery to hold while riding in the raining condition.love this grip so much.View Detail

This was a replacement for the existing hose clip that had been beaten up over the years and due to being removed a few times, had become loose and weak. Although you probably can get away with not being perfect but if you are like me, if a job needs doing, it needs doing well. Not specifically an expensive part so why not just change it. Finding the right part was not hard as I do use the help pages and links Webike provide on their help pages. I also cross referenced with Honda schematics to make doubly sure. The part was good value for what it does. I do always have more than one part in my basket for ordering as this help spread the cost of shipping. I used EMS as I have done for a number of months now, and every time, my order arrives promptly and on time. 7 days from being shipped from Webike warehouse and my order arrived. The parts were all really well packaged and no damage to anything at all. The hose clip is not really a special part but it did need to be the right size for the hose I needed it for. Really well made and has enough give in it to manoeuvre over the hose to make sure it was secure. Fitting is really quick as it just slips over the hose and slides up. Simply clip but well worth getting the right one for the model of bike I had. Very pleased with this purchase and the bike looks great. View Detail

About quality and texture, I can confirm that the quality is great and that the material used is chrome steel.About the feeling of use, Just one of the radial ball bearings needed for the new engine that I am building from newly purchased parts from Honda. It has done its job supporting the transmissions mainshaft within the left crankcase half.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and he ones to purchase together to allow for the assembly of the transmission are the other three radial ball bearings.Difficulty of installation, I can say the fitment of the radial ball bearing for my installation was average due to already having access as the crankcase half is new and the process is explained in the service manual which requires the radial ball bearing to be pressed into the crankcase using specific tooling so not to damage the bearing.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda radial ball bearing that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing,I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

Very nice grips.Little larger than standard,soft feel that reduces vibration.Highly recommended.Delivery from webike was very quick,easier than buying from local suppliers View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating. About the feeling of use, Two 16mm flanged bolts are needed for the new engine that I am building from newly purchased parts from Honda. They has done their job securing the oil separator plate onto the right crankcase half. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation of the flanged bolts is the oil separator plate. Difficulty of installation, I can say the fitment of the flanged bolt for my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual which is to be tightened to the required torque value. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda flanged bolt that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

This was a part that was needed for the CBR1000R that came in. This was in need of a new o-ring for the right side crank case cover that was also being changed. It just makes sense to change the o-ring too as the old one was not great. I did not know the history of this bike and with checking the old o-ring, it certainly needed a new one. I found the right o-ring by using the tools Webike provide on their help section and then cross referencing with Honda schematics for my own peace of mind. I did have a couple of other parts I needed to order so I just got them all at the same time. My preferred courier is EMS as they just get the orders to me fast and efficiently. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. This o-ring was inside the standard Honda packet and was in perfect condition. The quality is brilliant. It is a nicely made o-ring and there were no extra bits of rubber attached like you get with some after market brands. I double checked the diameter and it was exactly as it should be. I wipe a little oil on the o-ring in this section as it helps to stop from pinching or breaking the new o-ring upon install. Once fitted, there is a nice tight seal with zero leaks, even after a steady warm up. Great purchase, very happy customer. Thank you Webike. View Detail

A few small jobs needed to be completed on this Monkey bike of a customers. One thing that was failing was the tail light lens gasket rubber which had been pinched and was not sealing during wet weather, Obviously, this is not ideal as water is the enemy of the electronic on any bike. Luckily, we caught this in time and there was no real damage done to the electronic or the tail light lens. I found the right gasket for this tail light by using Honda schematics. The part is not an expensive one especially from Webike. It literally cost a few pounds. I wanted to get a few other parts for this bike and I ended up having all shipped using my favourite courier which is EMS. 5 days from being shipped from Webike warehouse my order arrived. All was well packaged and arrived in perfect condition. The gasket is a nicely made piece, it is injection moulded so you know it is going to fit exactly as it should. The quality is really good and they flex is enough but not too much to make the gasket go out of shape whilst fitting. Took a few minutes and then installed the tail light lens once more. Now this is water tight, there should be no issues in the future. Very pleased with this purchase and even more so with the low cost of the part. Brilliant work Webike. View Detail

A bike that came in for the service was found to have a few parts on the steering that were damaged and needed addressing pretty quickly. Although the washer and net were damaged, they did not cause any issues with the bike and the riding of it. Never the less, these needed changing at some point and now was the time I wanted to fix them. Finding the right washer for this bike was easy enough and I checked Honda schematics. Having found the right part number, Webike had these in stock and ready to ship. I did also order the steering stem nut whilst I was ordering and got them both shipped together using EMS. In just 5 days my order arrived. Everything was well packaged and where needed, extra padding was added. The washer is not a special washer but it is an important one. The diameter is as it should be and the thickness is spot on with the specifications needed. It is a top quality washer and well machined. Along with the steering stem nut, I fitted these new parts and the steering was back to how it should be. Hopefully, this will last a long time to come. By the way, it also looks awesome with the 2 new parts. Thank you Webike for the great job. View Detail

I had a few parts that had wire connectors attached to the bike and wanted to have them stored away safe from anything that could damage them. I could have just used after market cable ties but I found these Honda harness bands on Webike and figured they would do the job just right. I found them whilst searching for other Honda parts and the price is really exceptional for genuine Honda parts. I know these are not specifically used for the purpose I am using them for but what the heck. I purchased 3 of these harness bands and the price was cheap. I did have some other parts which were for this bike in my basket and got them all shipped using EMS. In 5 days my order arrived in perfect condition and no damage. The bands came in the standard Honda packaging and were kept nice and flat. The bands themselves are made from what looks like steel strips and covered in the post part with rubber sleeves. They do bend pretty easily which is very useful. The rubber covers are fairly thick too which is why they are essentially for wiring around the battery compartment. The quality is really good and for how much these cost, a lot better than I was expecting. All done and the wiring I needed tucking away is safe and sound. Thanks Webike. View Detail