- Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
The replacement of the Halogen bulb was very easy and took about 5 minutes to install.However, when actually illuminated, the light was not evenly distributed, making it sparse and very difficult to s...Read More - Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
I couldn't fix it, so I had to devise my own way to fix it.I don't know if brightness is an issue.Read More - Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
Since there is no Instruction Manual, I was a little confused. Since I didn't know what the right answer was, I managed to solve the problem in my own way, but even when I put it on, I didn't do any r...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I felt that it became brighter, but it did not pass the inspection. I had to replace the light with a simple Orange light at a motorcycle shop to pass the inspection. It was expensive.Read More - Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
I saw the imp and thought it would be Large sturdy, so I bought it.It is only a little brighter than Halogen bulb.In addition, the Base and Body are fixed weakly by O-ring, so there is a fear that the...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
It can be installed on B type 9R without any problem, but it is difficult to install without removing the Upper Cowl because the Spring that holds the Valve interferes with the Heat sink during instal...Read More - Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
The Light is dark and I bought this to brighten it up a bit.It's not installed yet, but I'm hoping it will be.Since it was cheap, will it be as bright as expected?Read More - Fits:
- KAWASAKI Z2 (750RS/Z750FOUR) Other Information] Old
- KAWASAKI
I did the installation test and it works fine and it is a Recommendation product.Read More - Fits:
- KAWASAKI Z2 (750RS/Z750FOUR) Other Information] Old
- KAWASAKI
I received the product today.There is no problem with the appearance, but there is a BALI left when the bolt hole was machined for fixing inside the Blinker Bracket, and it is necessary to remove the ...Read More - Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
DIO110 (JF58) Attached toChange from Halogen bulb.Bottom line, I'm glad I switched.Amateur maintenance, first Valve replacement, about 1 hour work time.It takes a lot of time and effort to remove the ...Read More - Fits:
- KAWASAKI Z750FX
- KAWASAKI Z2 (750RS/Z750FOUR) Conformity and other information]Old
- KAWASAKI Z2 (750RS/Z750FOUR)
- KAWASAKI Z1
- KAWASAKI Z1000 MkII
I bought this because my meter cover was corroding badly, and I chose the cheapest one made by Mad Max from Reproduct. I was worried because of the low price, but the packaging is very good and the qu...Read More - Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
I put it on my CB125T JC06, but it was difficult to install because the inside of the light case was too narrow. It was difficult to install because the light case was too narrow. Also, because there ...Read More - Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
The Headlight's Waterproof Cap was mentioned as needing modification, but it could be installed without modification.The lighting situation is normal.You can't install it without removing the cowl and...Read More - Fits:
- YAMAHA FJR1300 RP04
- HONDA HORNET900 SC48
- YAMAHA FJ1200 3CV
- HONDA LEAD125 JF45
- HONDA FORZAZ MF10
- ...and more.
I bought it as a spare so that I don't have to worry about when it goes out because my current $3,000 LED is two years old.And you can't go wrong with any of the products listed on We-Big! This is why...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
It is written that it corresponds to H4 Valve, but it is inaccurate and it is not possible to install it without removing it to some extent with File, and it doesn't fit in the Headlight because it is...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I wanted a brighter headlight with the old VMAX, so I decided to use Multi-reflector and Large diameter head, but I wanted a brighter light with the current appearance and aimed for LED.I tentatively ...Read More - Fits:
- SUZUKI GSX-R1100 (GU74A)
- SUZUKI GSX-R1100 (GV73A)
- HONDA CBR250RR (MC22)
- HONDA CBR250R (1-light vehicle MC41)
- HONDA CBR125R (JC50)
- ...and more.
I've been interested in it for a while, so I bought it to try it out! 。 Since there is a Large heat sink compared to the Halogen bulb, you can avoid it and use it as a heat sink Quantity lock Bracket:...Read More - Fits:
- KAWASAKI Z750FX
- KAWASAKI Z2 (750RS/Z750FOUR) Conformity and other information]Old
- KAWASAKI Z2 (750RS/Z750FOUR)
- KAWASAKI Z1
- KAWASAKI Z1000 MkII
Since the meter cover was dented and corroded due to ageing, I had to use the lower I considered buying it to change the cover at least While there are various reproductions, I purchased the one made ...Read More - Fits:
- KAWASAKI Z2 (750RS/Z750FOUR) Other Information] Old
- KAWASAKI
I attached it to the vehicle during Restore. Appearance is almost the same as OEM. Plating's texture is also good so I think that here is enough even if OEM is not available.Read More - Fits:
- KAWASAKI
- KAWASAKI
It installed near the Front axle part of a Motorcycle.
The improve visibility from the SIDE in night has an effect, and it is satisfactory also as a Fashion as an One point.
Since it only stops to a...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING