- Fits:
- KAWASAKI Z800 72-80
- KAWASAKI Z900 (KZ900) 72-80
- KAWASAKI Z1000 (air-cooled) 72-80
- KAWASAKI Z750 (air-cooled) 72-80
- KAWASAKI 750SS Mach IV (H2) 71-
There is no snagging, etc., and it works normally.I think that the quality of the bearing depends on the degree of low wear. I think it can be used without any problem as long as it rotates well and d...Read More - Fits:
- KAWASAKI Z1 (900SUPER4) 72-75
- KAWASAKI Z2 (750RS/Z750FOUR) 72-75
- KAWASAKI
- KAWASAKI
It is sometimes necessary to convert an old car to a front double.In our case, we put it on MACH.It is nice to have these parts available without having to make them at One-off!Read More - Fits:
- SUZUKI gsx1100s katana (sword) 83-
I think it is just as described in the product description. I bought this Bearing because I don't expect it to be durable. 1 unit is Quantity:I love that it's a Set!Read More - Fits:
- KAWASAKI Z2 (750RS/Z750FOUR) (Drum brake)
- KAWASAKI Z1 (900SUPER4) (Drum brake)
I thought that all Reproducts were made in the same factory, but now I realize that this is not the case.Read More - Fits:
- YAMAHA SR400 88-21
I bought this because I remembered that when I changed the Bearing of Steering from Open Type to this kind of Bearing at Motorcycle shop, they recommended me to change the Bearing of undercarriage fro...Read More - Fits:
- KAWASAKI Z1100R 81-85
- KAWASAKI Z1100GP 81-85
- KAWASAKI Z1000R 81-85
- KAWASAKI Z1000J 81-85
- KAWASAKI Z1100R 81-85
- ...and more.
I've always thought that I couldn't miss the wheel replacement on my 80's Super BIKE Custom, and although there were many options, I chose PMCSORD/Heritage.I just chose Rear first for the Rim width an...Read More - Fits:
- KAWASAKI Z1100R 81-85
- KAWASAKI Z1100GP 81-85
- KAWASAKI Z1000R 81-85
- KAWASAKI Z1000J 81-85
I bought it to widen the rear tire of Z1000JShop's Recommendation is 4.75 with Matching with the Tire we use So, I chose SORD-Heli TESI which is similar to the old Campagnolo I didThis can be 150/65−1...Read More - Fits:
- KAWASAKI
- KAWASAKI Z1000 (A1-A4)
- KAWASAKI Z750-D1 (KZ750D) 77-80
- KAWASAKI Z750FX -1
- KAWASAKI Z1-R/Z1-RII
- ...and more.
For dust protection and water proofing, non-contact rubber seal type bearing is used I don't think it doesn't matter much if you have a seal or not Collar will be installedIf this Seal is stupid, it w...Read More - Fits:
- KAWASAKI Z1000 (air-cooled) 76-80
- KAWASAKI Z1000 (air-cooled) 76-80
The finish is remarkable, unless you don't like the three-part Axle Shaft construction Mast bye ItemsIt may be necessary to change the diameter of Axle Shaft depending on the spec. of the wheels and f...Read More - Fits:
- KAWASAKI Z750FX
- KAWASAKI Z1000 MkII
- KAWASAKI Z900 (KZ900) 76-80
- KAWASAKI Z750 (air-cooled) 76-80
- KAWASAKI
- ...and more.
I installed it in my Kawasaki Z seriesIt was discount time, so I was able to purchase it at a fairly low priceThere are two color choices, and the design is good for Parenthesis and Cost Performance i...Read More - Fits:
- KAWASAKI Z750FX
- KAWASAKI Z1000 MkII
- KAWASAKI Z900 (KZ900) 76-80
- KAWASAKI Z750 (air-cooled) 76-80
- KAWASAKI Z1000 (air-cooled) 76-80
- ...and more.
I installed it in my Kawasaki Z seriesIt was discount time, so I was able to purchase it at a fairly low priceThere are two color choices, and the design is good for Parenthesis and Cost Performance i...Read More - Fits:
- KAWASAKI Z1000 (air-cooled) 76-80
- KAWASAKI Z1000 (air-cooled) 76-80 KZ
Although making can not be helped by price, there is about twice the folding of Center compared with OEM Product There is a possibility of hitting Seal part of Meter gear!Read More - Fits:
- KAWASAKI Z1000 (air-cooled) 76-80
- KAWASAKI Z1000 (air-cooled) 76-80
TERRABLE FIT - THREADS ON EACH END TOO SHORT, WASTE OF MONEY!! THIS IS THE FIRST TIME I HAVE HAD A BAD ITEM FROM WEBIKE, I HOPE FOR A REFUND. Read More - Fits:
- HONDA
- HONDA
- HONDA
- HONDA CB1100F
- HONDA CB750F
- ...and more.
As a product Body it is not possible without impossibility, I think whether it will be a price.However, if there is no Instruction Manual besides the notice of Pereaich, there is no more list of conte...Read More - Fits:
- HONDA CB900F
- HONDA CB750F
- HONDA CB1100F
- HONDA
- HONDA
- ...and more.
As a product Body it is not possible without impossibility, I think whether it will be a price.However, if there is no Instruction Manual besides the notice of Pereaich, there is no more list of conte...Read More - Fits:
- KAWASAKI Z1000 (air-cooled) 76-80
- KAWASAKI Z1000 (air-cooled) 76-80 KZ
It was a product as I thought. There is no problem with installation and texture is perfect.Cospa is satisfied well also in terms of price.Image when I installed it on the car body just like I was sat...Read More - I purchased it for Replacement from Rim of Rusty Rust. The condition of Plating well and accuracy is no problem. When the foot is tight, the whole looks better. Exchange is a trouble but it is worth d...Read More
- Fits:
- SUZUKI
- SUZUKI GSX1100S KATANA (KATANA)
Because the DYMAG of the 20 year old was broken, it was replaced with the PMCSORD Heli TESI. The appearance is not poled Mud black, but the surface is slippery and easy to clean. The weight is a bit h...Read More - Fits:
- KAWASAKI Z1000 (air-cooled) 18-inches/Rim Width:This is a steel swing arm for 4.50 inch wheels
- wide tires (160/60-18)
- KAWASAKI Z900 (KZ900) 18-inches/Rim Width:This is a steel swing arm for 4.50 inch wheels
- wide tires (160/60-18)
- KAWASAKI Z750 (air-cooled) 18-inches/Rim Width:This is a steel swing arm for 4.50 inch wheels
- ...and more.
Chain and Tire delicately cleaned up my friend's motorcycle so I bought this one because there is little clearance.Although it is 2 mm, it is completely different from a feeling.I hope the price i...Read More - Fits:
- SUZUKI GS400 77-79
Do you check the foil Bearing?From PMC Wheel Bearing (ZZ Type) The chose.You can rest assured that our products are made by FOR JAPAN MODEL Manufacturer.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING