The NGK spark plugs a great and I have never had a problem using them in all my years maintaining my motorcycles. Since they are so cheap to replace I never wait until there is a problem but just change them as recommended by the manufacturer. Good to see Webike have such a huge range of spark plugs available and if you wish to spend more money you can always upgrade to one of the higher quality spark plugs in the NGK range. Do not forget to alway check your spark plug gapping before installation just in case it has been messed up in transit.
View Detail
- Instock
4.48 EUR (755 JPY) 4.99 EUR Save 10%
Webike Point: +8 pt
(0.04 EUR)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
Open Fit Model Information Table
-
WAVE125S
Reimport [displacement]125 [number of units required]1
-
WAVE125i
04- Reimport [displacement]125 [number of units required]1
-
ANF125innova
03- Reimportation [displacement]125 [number of units required]1
-
WAVE125R
Reimport [displacement]125 [number of units required]1
See all
HONDA
Product detail
[Stock Number] 6899
[Shape] Screw type
[Size]
Screw diameter: Φ10.0mm
Screw length: 19.0mm
Hexagon dihedral width: Hex 16.0mm
[NGK part number] CPR6EA-9
[Type] Resister Plug
Plug unit and terminal image: [1-a] See Image 6
[Heat Value] 6
[Compatibility Information] DENSO Compatibility: U20EPR9
Compatible HONDA stock part number: 31916-KPH-901/31926-KPH901
SUZUKI OEM part number compatible: 09482-00620
**Even if you purchase in units of 10 pieces (1 box), it will not be delivered in 1 box.
*Terminals, tightening angle, etc. may differ depending on the model.Please refer to the link for the detailed fitting and installation instructions..
* The image is only for reference. The image shown may differ from the actual product.
Webike has all NGK plugs in stock! .
* The item may be temporarily out of stock due to manufacturer shortages, etc
Stable ignition performance and combustion efficiency at a reasonable price.It brings out the true performance of the engine.
[Features of Register plug]
A ceramic resistor is built in to suppress the ignition noise generated at the time of spark.
・The built-in ceramic resistor suppresses the ignition noise generated by the spark.
・Prevents radio noise in car radios, mobile hams, and car telephones.It also prevents the engine control computer from malfunctioning due to noise.
*The effect varies depending on the vehicle.
[About the shape of the plug terminal]
●Select a terminal shape that matches the engine and plug cord installation side.
There are three types of plug terminals: integrated type, separate type, screw type, and punch-and-caulk type.
Mainly, "integral type" and "punch caulking type" are used for four-wheeled vehicles and "screw type" for two-wheeled vehicles, and "separate type" is available for plugs used for both four-wheeled and two-wheeled vehicles.
In addition, the terminal part of the "separate type" can be removed, but the terminal part of the "integrated type" and "punch-and-caulk type" cannot be removed.If you try to remove it forcibly, the terminal part may be broken.
In case of using the "separate type" as the "screw type", remove the terminal nut.
When using the product with the terminal nut attached, make sure that it is not loose, and if it is loose, tighten it lightly with pliers or the like.
| [Features of NGK plug] |
| - This is a super "wide range" plug - |
| The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
 |
| Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
| ■ Heat value of the plug |
| - High alumina porcelain from New Ceramics is used as the insulator - |
| - Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
| - Strong and airtight in construction - |
| Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
| Special Nickel alloy electrodes are used for superior durability. |
 |
| - Corrugations in the insulator ensure good insulation and prevent flashover - |
| During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
| What is a flashover... |
| It is a spark between the terminal and the main unit fitting as shown in the image. |
 |
| ■ Flashover |
| ■The advantages of the plug |
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
- ALL
- Japan (694)
- Australia (22)
- South Korea (13)
- United Kingdom (13)
- Russia (10)
- Sri Lanka (5)
- United States (5)
- (2)
- Belarus (2)
- Canada (2)
- Malaysia (2)
- New Zealand (2)
- Philippines (2)
- Sweden (2)
- Chile (1)
- Hungary (1)
- India (1)
- Israel (1)
- Thailand (1)
- Turkey (1)
- Ukraine (1)
- Kazakhstan (1)
Fits:HONDA MONKEY125 18-21 JB02 18.7- [displacement]125 [number of units required]1, HONDA glom 13-21 MSX125 JC61、 JC75 13.5- [displacement]125 [number of units required]1, HONDA WAVE125i 04- Reimport [displacement]125 [number of units required]1, HONDA WAVE125S Reimport [displacement]125 [number of units required]1, HONDA WAVE125R Reimport [displacement]125 [number of units required]1
Installed on: HONDA Monkey 125
Fits:HONDA MONKEY125 18-21 JB02 18.7- [displacement]125 [number of units required]1, HONDA glom 13-21 MSX125 JC61、 JC75 13.5- [displacement]125 [number of units required]1, HONDA WAVE125i 04- Reimport [displacement]125 [number of units required]1, HONDA WAVE125S Reimport [displacement]125 [number of units required]1, HONDA WAVE125R Reimport [displacement]125 [number of units required]1
Jul 1, 2021
Buy MONKEY125 subscription for Replacement
[How is it used?
I bought this product as a regular replacement for my MONKEY125, which is very active on the street and touring, and I considered the Windshield IRIDIUM, but since I am not dissatisfied with the current situation, I decided to go with the OEM Product.
How was your experience with it?
Engine starts and feels fine to ride.
How did it compare to other products?
I haven't compared it to other products, so no rating.
[Points to note]
Let's get a 16mm Plug wrench. (^^)
Opinions and Requests to the ▼Manufacturer
Nothing in particular, it's a reliable and secure Manufacturer.
Helpful?
Fits:HONDA MONKEY125 18-21 JB02 18.7- [displacement]125 [number of units required]1, HONDA glom 13-21 MSX125 JC61、 JC75 13.5- [displacement]125 [number of units required]1, HONDA WAVE125i 04- Reimport [displacement]125 [number of units required]1, HONDA WAVE125S Reimport [displacement]125 [number of units required]1, HONDA WAVE125R Reimport [displacement]125 [number of units required]1
Jun 29, 2021
Installed on JC92.
It was replaced from OEM after driving about 10,000km.
The installation itself is super easy, anyone can do it, no Cowl, no hassle, so I'm guessing it takes less than 5 minutes to do.
Now, let's get down to business. Compared to the OEM, there are some points that can be said to be NGK.
Although the factors in the improvement of response are various, there is a Plug exchange as a thing that can be done easily and cheaply, and among them, the ignition Plug of NGK is sure.
Naturally, the goodness or badness of the ignition plug changes according to the way of riding. My way of riding is town driving, and the number of revolutions runs high rather in Touring Main. Because Throttle response is good even in such a way of riding, I felt that the Torque feeling increases. (I didn't measure the numbers, it's just subjective.)
In this Plug, the person whose ride I can recommend is a street-driven Main. In the city driving where there is a lot of outgoing stop, the better Response of Throttle is, the more comfortable it can run. It can be said that it is a good product especially when it is a town ride in the low rotation range.
However, as others have mentioned in their Reviews, the loss of fire is a bit of a bad sign. It's not a quirky Level that interferes with driving, so if you don't mind, it's not a problem.
I can say that it is a Point that should be meditated on because it is inexpensive.
The approximate replacement time for the Large body is 10,000 km.
As for cost effectiveness, I personally find it to be a pretty good category.
If you are replacing from OEM, I can highly recommend it.
As for the purchase, it's Level you can consider.
Helpful?
Fits:HONDA MONKEY125 18-21 JB02 18.7- [displacement]125 [number of units required]1, HONDA glom 13-21 MSX125 JC61、 JC75 13.5- [displacement]125 [number of units required]1, HONDA WAVE125i 04- Reimport [displacement]125 [number of units required]1, HONDA WAVE125S Reimport [displacement]125 [number of units required]1, HONDA WAVE125R Reimport [displacement]125 [number of units required]1
May 2, 2021
Not much to say really. But this is the spark plug that comes from Honda on the 2018 Monkey 125cc. Have replaced it at 4000 miles. Earlier then Honda recommend at 8000 miles. The old spark plug looked fine. But for the low price that Webike offer these it is a good idea to keep the motorcycle running well. NGK is my preferred spark plug brand. I have always had a good experience with them and this time is no different. I always like to add a little anti size compound on the initial installation. This one went straight in and the engine fired right up without a problem. Very happy with the product from NGK and the service from Webike.
View DetailHelpful?
Fits:HONDA MONKEY125 18-21 JB02 18.7- [displacement]125 [number of units required]1, HONDA glom 13-21 MSX125 JC61、 JC75 13.5- [displacement]125 [number of units required]1, HONDA WAVE125i 04- Reimport [displacement]125 [number of units required]1, HONDA WAVE125S Reimport [displacement]125 [number of units required]1, HONDA WAVE125R Reimport [displacement]125 [number of units required]1
Jun 29, 2016
Grom II type already already over 8,000 kilometers
As the misfire began to occur, in order to replace the Plug this time
I bought it. Since it is Normal engine, I replaced it with an ordinary ignition plug.
Helpful?
New Custom Articles
