[Handlebar specification] Handle: Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm ・Stock cables and hoses can be installed on as is
[handlebar size] Total height: 80mm Full width: 590mm Effective width of holder installation part: 145mm Pullback size: 125mm Insertion angle: 45 degrees Forward leaning angle: 127 degrees
*Handlebar clamps (holder or post) in the photo are not included in the product. *Sizing shown is for a horizontal position. *Images may contain other colorings and types.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I installed it on my APE 100 The OEM Pipe Handlebar was a little too wide for my liking, so I had to find a way to squeeze it The width is narrower than the OEM, so it's a bit narrower than I expected But it's not hard to get on, so you can ride it for a while We'll see View Detail
[Webike Monitor] It was used for RZ50.The lappet angle of the Handle stuck from delicate appearance by changing into a Condor from a pure Handle, and it became a Race ish, and became smart.If it is tight and uncomfortable at first, since an inclined attitude becomes strong, but it gets used, it will be OK, and for the run by a peak etc., it will be easy to attack at the time of entrainment, and it will be a Recommendation.View Detail
I bought it for Custom of YB-1Four, and attached it backwards with Separate handle in mind. (I don't know if HURRICANE recommends reverse mounting, so it's just at your own risk)
From the Business motorcycle-like smart position of NORMAL, the line of sight is lowered at once, and the appearance becomes motivated suddenly. It's a new look.
On the other hand, if only the Handlebar is replaced, the footpeg position will be too far forward and the knee will be between the arm and the Tank. Therefore, the full lock Turn cannot be performed as it is. (I can't cut Handlebar because my knees are in the way) . I think the ideal position can be achieved if the Rear Sets are installed and the knee position is brought to the back.
The posture is hard to say the least, but you can feel the ground contact of the front tire closer, so it is recommended for those who want to run.View Detail
In fact, although he wanted to use a Separate handle, since the price was handy, it carried out here. How to attach was adopted inverse attachment.Although management of Wires became narrow, it was able to attach once also with the NORMAL. Since a Position is also still a Normal step, it is very narrow.He plans to bear until it purchases a Back step.However, since it was felt quick or the posture in a Corner also changed even if it was running at the same Speed, when the Position fell, I thought that there was individual difference, but I have ridden from the front and became a pleasant Motorcycle.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!