Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
Pipe diameter: Φ22.2 Effective pipe length: 55mm Total length of bar section: 100mm (excluding cap part) Steel
[Set components] Bar holder 1 piece Barring washer 1 piece
*This product cannot be installed with Helmet Holder (79399) at the same time. *Right and left installation possible (YZF-R25 can be installed only on the left side, GROM (JC61, 13-14) can be installed only on the right side). *When installing to YZF-R25, mirror hole filling bolt (70921) is required. *MT-09 can be installed on both sides. *GSX250R 2017 model (2BK-DN11A): Installation position is left side only. (70921) Hole filling bolt is required. *Some images show GSX-S1000.
Fits: HONDA CB650R 21 CB650RAM J 2BL-RH03 Accelerator side only, HONDA 400X 19-21 NC56 *Right and left front side OK, HONDA CRF250RALLY 21 (CRF250LRAM J) MD47 Left side only allowed, HONDA CRF250L 12 MD38 [Frame No.]MD38-1000001 to 1099999, HONDA CB223S 08 MC40 [Frame No.] MD33-1000001 to 1099999
Was the one you received as per Image? As per Image I own several Motorcycles and have installed them on all of them.
Was the installation difficult? It's easy
How was your experience with it? For mounting a camera, a smart phone, etc... It increases the convenience of the Handlebar and its surroundings. The weight is not a concern. Wind and weight do not affect Handling.View Detail
Fits: HONDA CB650R 21 CB650RAM J 2BL-RH03 Accelerator side only, HONDA 400X 19-21 NC56 *Right and left front side OK, HONDA CRF250RALLY 21 (CRF250LRAM J) MD47 Left side only allowed, HONDA CRF250L 12 MD38 [Frame No.]MD38-1000001 to 1099999, HONDA CB223S 08 MC40 [Frame No.] MD33-1000001 to 1099999
I used to use a Stem Mount Holder, but many times when I turned the key, the Stem Mount Holder got in the way and I got frustrated. It's also annoying that I've broken the fixed Hook on the Smart Holder twice when I've put Helmet on the Tank or something;
I ordered a number of mounts from various manufacturers, and after a lot of trial and error, I finally decided on a mount that was JUST right. The Cowl is too low for the recent sports models, and if you use a higher Mount Bracket, it will interfere with the Cowl, but this Mount is fixed to the Mirror Hall, so it will not hit the Cowl.
I should have chosen this one from the beginning. Crying 。View Detail
Fits: HONDA CB650R 21 CB650RAM J 2BL-RH03 Accelerator side only, HONDA 400X 19-21 NC56 *Right and left front side OK, HONDA CRF250RALLY 21 (CRF250LRAM J) MD47 Left side only allowed, HONDA CRF250L 12 MD38 [Frame No.]MD38-1000001 to 1099999, HONDA CB223S 08 MC40 [Frame No.] MD33-1000001 to 1099999
[How is it used? Used on KawasakiD Tracker, KawasakiNinja250R and KawasakiZ400. Smartphone Holder, used to mount a USB charging port. Installed with Mirror Holder as described in the product description. Traveling:Street riding, Touring
Was the one you received as per Image? As you can see in the image, this is a great way to hold a smartphone holder that cannot be attached to the Handlebar.
How was your experience with it? The above four models are not included in the list of compatible models, but I think they can be installed on any model as long as the Handlebar has an Up Mirror Holder. If you don't have a Mirror Holder, you can buy one separately and install it, so you don't have to give up just because it's not included in the list. This product was especially useful for the Ninja 250R, which has a separate handle, so there is no space to mount a smartphone holder, etc. on the handlebar. The installation was done using the Mirror Holder for all models. The installation itself is not a difficult task if you allow enough time, so take your time and don't rush. This product is made of steel, so if it is exposed to rain, there is a large possibility that it will rust if there are scratches on it. It is better to protect the painted surface with wax etc. as much as possible. Mine never got rusty.
[Points to note] As mentioned earlier, the installation itself is easy, but it is recommended that the positioning be carefully considered so that it does not interfere with Handlebar operation. It is especially important to install the product in such a way that you don't hit your hand on the product or the attached smartphone holder, etc. the moment you do so, since most people probably do so with their left hand. Installing it on the throttle side is also a good idea, but some demerits make it difficult for right-handed people to operate the phone, so think carefully before choosing a product. (This product is also easy to mount in Large, but I recommend using HandlebarCenter as much as possible if you want to mount your phone.)
How did it compare to other products? When compared to the aforementioned products that allow the Smartphone Holder to be attached to the HandlebarCenter. It is easy to interfere with Handlebar operation. There is a lot of eye movement. There is a Demerit of etc. On the other hand, I think the Merit is the convenience that this product can be installed on any motorcycle as long as you have a Mirror Holder.
Point and hang of installation Attach to Mirror Holder (To be co-located with Mirror) Don't forget to adjust the angle of the mirror when using the camera. Position and install the unit so that it does not interfere with operation. If you follow the following tips, you will be able to drive safely.View Detail
Fits: HONDA CB650R 21 CB650RAM J 2BL-RH03 Accelerator side only, HONDA 400X 19-21 NC56 *Right and left front side OK, HONDA CRF250RALLY 21 (CRF250LRAM J) MD47 Left side only allowed, HONDA CRF250L 12 MD38 [Frame No.]MD38-1000001 to 1099999, HONDA CB223S 08 MC40 [Frame No.] MD33-1000001 to 1099999
[How is it used? I'm using the ActionCamera co-tightened to the Mirror screws. Was the installation difficult? It's easy to remove the Mirror, insert this product and install the Mirror again. How was your experience with it? There was no vibration and no discomfort. [Was there anything that disappointed you? There is a hole in the Bracket, but it is suitable for using through the Cable, but I am worried about the strength of the Bracket under the vibration. I feel that this hole is not necessary. It's made by Manufacturer, but it's pricey.View Detail
Fits: HONDA CB650R 21 CB650RAM J 2BL-RH03 Accelerator side only, HONDA 400X 19-21 NC56 *Right and left front side OK, HONDA CRF250RALLY 21 (CRF250LRAM J) MD47 Left side only allowed, HONDA CRF250L 12 MD38 [Frame No.]MD38-1000001 to 1099999, HONDA CB223S 08 MC40 [Frame No.] MD33-1000001 to 1099999
I bought this to attach my phone folder to my SUPER CUB. It's a safe manufacturer and no problem at all. I'm also indebted to DAYTONA for a little bit of other things. (^_^)View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!