Grip Heater GH07 with Built-In Switch Inch

A slim but hot one!!!
New grip heater GH07 series!The most important feature is the slimmer diameter.

The GH07-inch switch built-in grip heater, which is even thinner and easier to grip than the previous model, has been newly introduced to the KIJIMA grip heater, a strong ally for the harsh autumn and winter seasons!
It is a new design exclusively for inch handlebar vehicles that can be easily installed on inch handlebars that are widely adopted by Japanese cruiser and Harley-Davidson!
This grip heater has a slim grip with a width of Φ37 which is even easier to grip than conventional products, and a functional heat wire all-around structure for excellent heat conduction.
The integrated design of the grip and the switch does not take up any switch space and can make the area around the handle look neat!
The LED indicator glows in five different colors to let you know the grip temperature!It is easy to check while you are driving because it tells you the five temperature adjustments by emitting blue, green, yellow, orange and red light!
The integrated switch allows you to adjust the temperature without taking your hands off the handle!
The shape of the bar end cap is compatible with both bar endless and with bar end condition, so you can use your favorite bar end!
Slim, all-round heat wire type that easily transfers heat to all palms and is easy to grip, so only your fingertips won't get cold!
The battery protection function (voltage suppression function) protects the battery even if you use too much electricity!
The heat and weather resistance of the grip is renewed!

..:゜-+;;+-゜:..GOGO!Fall and winter bike riding!!! Report on the enthusiastic ride in the cold season!!!!..:゜-+;;+-゜:..

In the fall and winter when the temperature drops, touring with your beloved vehicle in the cold weather, motorcycle commuting, homecoming, every riders may think all of them are cold and severe for human beings, but if you turn your attention to your beloved motorcycle, in the fall and winter when the weather is clear, "(1) the outside temperature is low," "(2) there is little moisture," "(3) if there is no snow on the plain, the road surface is dry. If you're not into sport riding and high performance operation, it's a good season for bikes, vehicles, and internal combustion engines that are designed to be warmed up.

It's a shame that only such riders feel that "if only it were warmer..." or "if only it were a little sunny..." and don't ride, polish, maintain, or hibernate their bikes!
With a little ingenuity, riders can ride with their beloved vehicle from Hokkaido, Russia to the Eurasian continent!New discoveries that you can only see and notice in the fall and winter are waiting for you!

You don't have to be so passionate, but it's good for your immune system and health if you expose yourself to the outside air once in a while instead of just staying in a heated house. Walking is good, but if you have a bike, it's refreshing to get away while there's still daylight.
In addition, capillaries are flowing in the palm of the hand and fingers, which are warmed by the grip heater, and the body temperature is adjusted by radiating and absorbing heat from the blood circulating in the human body.
The reason why your fingers get sore and cold when you ride a motorcycle in the fall and winter is because you can't absorb heat and your fingers can't bend and your body temperature drops.
The finger is a part of the human body that can never be replaced, as if it were a super high-performance radiator.
If you use a grip heater to heat up your fingers, which are said to be the part of the body that gets cold the most, it will alleviate the drop in body temperature to a certain extent and delay the negative impression of "cold and pain" in your brain, so you can end the day with a good mindset of "it was fun" during the fall and winter touring!
If you use it with a handlebar cover from outside the company, you can get the much warmth.

[List of useful parts for grip heater installation]
30019 (GRIP-IT Heat-resistant Grip-Bond 0.5oz (14.2g))
HD-04803 (For throttle tube inch/dual cable Black (1982-2015 accelerator section 2 pull wire, Harley only))
HD-04809 (For throttle tube inch/dual cable White (1982-2015 accelerator section 2 pull wire, Harley only))
HD-04812 (Throttle Tube Electric Throttle 08y-Touring/16y-Softail (2008 and later Touring models and 2016 and later Softail models accelerator part electronic throttle, Harley only))
201-531 (Throttle tube inch HONDA AMERICAN 130mm (Shadow 400, Shadow Classic 01y-, Shadow 750 03y-, Shadow Thrasher 00y-, VT400, VT750 10y-))
201-597 (Grip spacer 26 x 50mm x 5t 2pcs set)
201-5971 (Grip spacer rubber 26 x 45mm x 3t 2pcs set)
201-5972 (Grip spacer rubber 26 x 45mm x 5t 2pcs set)
304-7141 (Harness ACC Split KIT 110 Type 2P Cygnus X (SE44J))
304-7142 (Harness ACC Split KIT HM090 Type 2P Honda OP Coupler 2)
304-7143 (Harness ACC Split KIT HM090 Type 4P Honda OP Coupler 1)
304-7144 (Harness ACC Split KIT 110 Type 3P Yamaha)
304-7145 (Harness ACC Split KIT 110 Type 4P Suzuki)
304-7148 (Harness ACC Split KIT Waterproof MT090 IL 2P)
304-7149 (Harness ACC Split KIT 250 Flat 4P)
304-7150 (Harness ACC Split KIT Waterproof AL 2P)
304-7151 (Harness ACC Split KIT Non-Waterproof SMHM090 2P)
304-7152 (Harness ACC Split KIT Waterproof TS090 2P)
304-7153 (Harness ACC Split KIT Brake Switch 187 Flat)
304-7021 (Housing 2 poles 110 for Fasten Terminal)
304-7022 (Housing 4 poles 110 for Fasten Terminal)
304-7147 (Coupler SET HM090 4P Male / Female / Terminal 1SET)
304-7130 (Waterproof coupler set HM090 2p male / female / terminal 1set)
304-7131 (Waterproof coupler set HM090 3p male / female / terminal 1set)
304-7132 (Waterproof coupler set HM090 4p male / female / terminal 1set)
304-7146 (Waterproof coupler set mt090 3P Male / Female / Terminal 1set)
304-7050 (Convert Harness for HONDA male - female x2 AV1.25 2 pieces SET)
304-7133 (Convert Harness Female W / Male Bullet 110mm (Cord 70mm) Red)
304-7134 (Convert Harness Female W / Male Bullet 110mm (Cord 70mm) Black)
304-7135 (Convert Harness Female W / Male Bullet 110mm (Cord 70mm) Yellow)
304-7120 (Flat Terminal SET 250 L Male, Female, with Sleeve 5 pieces SET)
304-7121 (Flat Terminal SET 185 M Male, Female, with Sleeve 5 pieces SET)
304-7122 (Flat Terminal SET 110 S Male, Female, with Sleeve 5 pieces SET)
304-7042 (Spade Terminal Set, M6 Sleeve, 5-piece set)
304-7124 (Round Terminal SET for M6 with Sleeve 6 pieces SET)
304-7125 (Bullet Terminal SET, female W, with Sleeve 2pcs SET)
304-7126 (Bullet Terminal SET, male, female, with sleeves, 8-piece SET)
304-7127 (Bullet Terminal SET, male, female, with sleeves, 20-piece SET)
304-7136 (Bullet Terminal SET, for HONDA, male, with sleeve, 8-piece set)
303-1320 (Protect mesh 7.0-16.0 x 1500mm)
303-1321 (Protect mesh 10.0-28.0 x 1000mm)
303-1322 (Protect mesh 13.0-33.0 x 1000mm)
303-1323 (Protect mesh 19.0-40.0 x 500mm)
303-1324 (Mesh Tube Stock 3.2-9.5 x 2000mm)
303-1325 (Self Wrap Sleeve Inner diameter 5mm (Opening 29) x 1000mm)
303-1326 (Self Wrap Sleeve Inner diameter 8mm (Opening 45) x 1000mm)
303-1327 (Self Wrap Sleeve Inner diameter 13mm (Opening 68) x 1000mm)
303-1328 (Self Wrap Sleeve Inner diameter 16mm (Opening 75) x 1000mm)
303-1329 (Self Wrap Sleeve Inner diameter 19mm (Opening 95) x 1000mm)