*Registration, license, insurance and other conditions must be changed for riding on public roads with the Big Bore Kit installed. *If the engine is combined with a high speed type chamber for 50cc, the engine will rev even higher and the cooling limit of the air-cooled engine will be exceeded, causing overheating and seizure.Please use a commercial chamber with a maximum speed of 10, 500 rpm. *In case of using this product with the exhaust gas countermeasure models released after September 1999, the stock carburetor and exhaust will cause abnormal overheating of the catalyst and damage the engine.98 or earlier stock carburetor (replace main jets with #85-90), or DAYTONA big carburetor kit, and a big bore exhaust with a max rpm of 10.500 rpm or less are required. *For 2-stroke oil, use Motrex RACING POWER2T, Castrol POWER1 TTS Racing, Wachow's V2R, or Elf Moto 2XT-Tech.Also, if your engine has a high RPM setting due to the installation of a chamber, please use a gasoline mixture (or fuel injection and gasoline mixture). *If you are using a stock carburetor, you need to set the main jet and jet needle.The main jet should be #5-#10 up with stock air cleaner and the jet needle should be one step down from the 0 clip position. *Changes to registration, license, insurance and other conditions are required for riding on public roads with the Big Bore Kit installed. *Only the stock JOG-ZII <5EM1> exhaust (#5EM-14610-00) can be installed on the emission control model (99/9-).
[Notes]
3. make sure that your voluntary and compulsory insurance covers you for the new displacement.
The fastest way to power up! Compared to the stock cylinder diameter of 40mm, the Super DRAG Big Bore has a cylinder diameter of 48mm. The shape of the exhaust and intake ports is specially designed for each model. Big bore kit with cylinder head for overwhelming power and torque. The cylinder bore has been increased to the maximum allowable size of 48mm to achieve the maximum displacement. The exhaust port and intake port design has been redesigned to fit the new bore size, and a cylinder head is included to allow for the larger combustion chamber of the 48mm piston. In combination with the stock exhaust, it provides strong acceleration.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!