Monkey 125's pure mirror has a very narrow field of view. I found a radical mirror while looking for the mirror because it was dangerous when driving. It also has gold points, so it goes very well with Monkey 125.In addition, mirror adapter fastening bolts are included in different types, so they can be mounted on various motorcycles. It's still not fitted, but the finish and design are very good as I thought. Glass is big, tooThe view is much better than the previous mirror. I'll use it well. Thank you.
View Detail
63.21 ~ EUR (10,650 JPY)
Webike Point: +107~ pt
(0.63 EUR)
Delivery Information
-
Please select product form first.
FITMENT
HONDA
-
Dio110
21- 21.2-[JK03-1000001-]
-
CROSSCUB110
18-22 18.2-22.4[JA45-1000001-]
-
CROSS CUB50
18- 18.2-[AA06-1000001-]
-
CB125R
18-21 18.3-21.4[JC79-1000001-]
See all
HONDA
YAMAHA
-
NMAX
21- 21.6-[SEG6J-000001-]
-
MT-09
17-21 17.2-21.8[RN52J]
SUZUKI
-
V-STROM250
18- 18.10-[LC6DS11AZ01103705-]
-
Gixxer 250
20- 20.6-[ED22B100001-]
-
Gixxer 150.
20- 20.3-[ED13N-100001-]
-
SWISH
18- 18.6-[2BJ-DV12B-100001-]
See all
SUZUKI
KAWASAKI
Open Fit Model Information Table
-
Z900RS
17-22 17.12-22.9[ZR900C-000001-]
Product detail
[Size] 80mm (length) x 140mm (width)
[Adjuster mechanism] 10-way (18 degree intervals)
[Set components]
・Main body (set of 2)
・10mm right handed screw x 2 / left handed screw x 1
・8mm right handed screw x 2 / left handed screw x 1
[Installation time] 0.2h
**Image may contain other colors.
*Please note the installation instructions.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*Please make sure to check the vehicle before placing an order.
*This product can be installed as it is if the mirror mounting part is right handed screw on both sides.(HONDA, KAWASAKI, SUZUKI)
*For vehicles with mirror mountings that are left handed screw on either side, be sure to use the stock adapter.(Yamaha)
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product.
*[How to adjust]
The angle can be adjusted by loosening with a 6mm hex wrench.
The angle can be adjusted in 18° increments.When tightening, align with the groove, otherwise the groove may be crushed.(See image)
*[New standard]
For a circular type, the diameter must be between 94mm and 150mm, and for a non-circular type such as a square type, the diameter must be 78mm and the length must be 120mm and the width must be 200mm or less.
Its structure soften the impact when the mirror comes into contact with a pedestrian.
The center of the reflective surface shall be at least 280 mm outside the vertical plane parallel to the direction of travel, passing through the center of the steering device.
*There may be changes in product specifications due to the manufacturer's reasons..
Radical mirrors are available.
Turner mechanism is used!
Sleek installation.
HONDA, KAWASAKI and SUZUKI vehicels equipped with right handed screw mirrors do not need to use the stock adapter.
A mirror with an innovative design not found in the stock!
Just by installing it, you can change the image of your vehicle and make it look different from the past.
In addition, not only styling but practicality, the mirror surface is large enough for smooth rearward checking, and it has an adjuster mechanism to bring the mirror to the user's favorite position.
This mirror is a good choice for both practical and custom use.
[Adjustment method]
The angle can be adjusted by loosening with a 6mm hex wrench.
The angle can be adjusted in 18 degree increments.
[New standard]
For non-circular types, such as square, a circle of 78mm in diameter must fit, and the length must be 120mm and the width 200mm or less.
Its structure soften the impact when the mirror comes into contact with a pedestrian.
The center of the reflective surface shall be at least 280 mm outside the vertical plane parallel to the direction of travel, passing through the center of the steering device.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
HONDA
- CROSS CUB 50
- CROSS CUB (CC110)
- Dio110
- Dio110
- CT125 Hunter Cub
- Super Cub C125
- Super Cub C125
- Monkey 125
- Monkey 125
- CB125R
- CB125R
- LEAD125
- MSX125 (GROM)
- MSX125 (GROM)
- PCX eHEV
- PCX HYBRID
- PCX150
- ADV150
- PCX160
- CB250R
- CRF250L
- CRF250 RALLY
- Rebel 250
- GB350
- GB350S
- CB400X
- CB400X
- CB650R
- NC750X
- CB1100 RS
- Rebel 1100
- Rebel 1100
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA CROSS CUB50 18- 18.2-[AA06-1000001-], HONDA CROSSCUB110 18-22 18.2-22.4[JA45-1000001-], HONDA Dio110 21- 21.2-[JK03-1000001-], HONDA Dio110 17-21 17.4-21.2[JF58-1100001-], HONDA CT125HONDA CT110 HUNTER CUB 20- 20.6-[JA55-1000001-]
Installed on: HONDA Monkey 125
New Custom Articles
