Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
*This product can not be fitted to vehicles where the discharge volume when the inner wire is pulled out does not fall within the range of 40-50mm. *The clamps may be damaged by "over-torque" during installation.Since it is very dangerous, please control the torque sufficiently when you install it.The installation torque of the M6 clamp bolt is 12N-m. *The image may contain other colorings and types.
* The image is only for reference. The image shown may differ from the actual product.
High-spec clutch holder kit for exquisite lever operation Wire Clutch Holder Kit with all adjustments for smooth clutch operation. Adjustable lever ratios and lever position, which are the dedicated function of Gale Speed, enable each riders set slight touch. As with the master cylinder, forged aluminum is used to achieve both high rigidity and light weight, with no rattle and no loss of fingertip strength. It gives you a custom-made feeling of operation.
■Ratio adjuster Equipped with two types of barrel holders with adjustable lever ratios.You can choose the lightness and operation feeling.
■Lever opening angle adjustment mechanism 15 ways of lever opening can be adjusted by dial operation.
■Mechanical switch Standard products equivalent to stock products are equipped as standard.Sports vehicles can be installed by simply replacing the terminals.
■Cut-out processing of lever The lever has been cut out to reduce weight.In the event of a fall, only the tip breaks off, and its advantage is that you can continue riding.
■Built-in bearing The pivot part connecting the bracket and knocker is designed to operate smoothly even when the pivot pin is tightened.
■Wire adjustment dial Wire space can be easily adjusted while wearing gloves.
■Foldable lever Designed in a way that the lever tip collapses in the event of a fall which reduces the impact on the main unit.
■The same ratio as stock, but lighter The bearing in the pivot section reduces the resistance when pulling the lever, enabling smooth clutch operation.
■Round Lever The lever has a round shape that can be pulled by sliding it with your finger.
■Change of lever touch by the barrel holder By changing the distance from the working point (Barrel) to the fulcrum (Pivot), the ease and lightness of clutch disengagement can be changed by utilizing the "principle of leverage". ・Two types of barrel holders are included This product comes with 28mm and 30mm, or 32mm and 34mm barrel holders.Choose the holder size that gives you the desired touch.
<Distance to fulcrum> ●In case of being further The stroke becomes shorter and the clutch disengagement becomes better. *The clutch may not disengage depending on the bike model. ●In case of being close The stroke becomes longer and clutch operation becomes lighter. *The clutch may not disengage depending on the bike model.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
As nice looking as it is solid in feel, and smoothness. A quality part you can tell from the time you open the box. The finish is extravagent, and durable, yet when installed the pull of the clutch lever is SMOOOTH!... top quality part from galespeed as always.View Detail
I've often heard people say that the Clutch lever was installed to improve the weight of the Clutch lever, but although the weight wasn't a big concern, I was concerned about the OEMLever's wobble up and down, so I replaced it.
Because the distance between Thailand and Holder became longer, the handling of Clutch Cable had to be reviewed a little, but it was possible to install it with no problem. Wiring to the Clutch switch could also be attached without any modification.
I couldn't help but be taken aback by the texture of Cut-out, the lack of wobble that comes from the high level of accuracy, and the smoothness of the sound when it is pulled. Because my hand is Small size (Gloves are usually S size), I decided to use Short Type Lever. We think it's a good thing that there doesn't seem to be a Damage of
The manufacturer's website has a list of checkpoints before installation, so I think it's a good idea to refer to it.
As a side note, the box is very solid. The Opening Ceremony. Package that makes you want toView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!