8.59 EUR
(1,400 JPY)
6.3 EUR
(1,027 JPY)
(27% OFF)
5 (4 Reviews)
Excellent
W650That’s cool stuff. And shipping very fast... thanks for everything . My bike is Kawasaki w650 , DAYTONA Inner Silencer .
Reviews For DAYTONA Inner Silencer (Exhaust Interference Noise Reduction Type) From Other Webike User
Excellent
They muffled it better than I expected.[How is it used?
I installed this on my DogFiret Full Exhaust System.
I bought it with the expectation of further muffling because I use care near my home though End Baffle was attached.
Was the one you received as per Image?
I'm very pleased with the results.
Was the installation difficult?
Because tightening was not possible, I welded the Nut of the attachment to the inside and installed it though it was fixed with Bolt&Nut of the attachment, but the assumption was Bolt&Nut on the Pipe end side because it was installed in the opposite direction.
How was your experience with it?
In terms of volume, it is definitely muffled and I am satisfied.
[Included Parts:were they on?
M6 Bolt&NutP=1.25?
I welded the Nut that came with it, but the Bolt used the Cap bolt, so the Pitch didn't match, and I was forced to cut the Tap. (Lol)
[Was there anything that disappointed you?
To be honest, I didn't have very high expectations.View Detail
Very Good
halfway throughI used it for Full Exhaust System of PoshW1Type. Does it have some sound deadening effect? The degree. If you want to put it on, I recommend End Baffle made by DAYTONA because it can change the sound quality fundamentally and make the sound crisper than the treble because the bass sound that resonates to the belly of this exhaust system will be faded.
I tried to wrap the Glass Wool around it and install it, but it didn't go into Silencer because of the thickness of the Glass Wool (only one round roll, but it didn't go in).
The sound is completely a personal preference and sensation, so you can buy and wear this product and try it out to see what works for you since it's not that expensive.
View Detail
Excellent
Hard to evaluate.I installed it in w650 Posh Slip-on Silencer. As it is Universal, it is difficult to say how to evaluate it, but one thing I regret is that the installation bolts were rusted both of the two I bought. The only thing I regret is that the bolts I bought both of them were rusty.View Detail
Most Viewed Reviews Of DAYTONA Baffle / Inner Silencer
Excellent
Doka Puffo CalmingI bought a used car with a Doka Puffo Slip-on Silencer, changed it to a one-seater at 98db, which is just under the volume limit, and registered it.
I tried this one because I wished it was a little quieter, both in terms of public sentiment and for my own personal use.
I know it was originally designed to be mounted on the end, but I don't want to drill a hole in it.
Wrap the stainless wool as shown in the photo and insert it into the connection with the exhaust pipe.
Nothing is fixed, but the exhaust system tube is bent at the end of the connection, so it seems to stop there even if it moves.
As a result, the sound quality remained the same and became reasonably quiet, and starting was a little easier.
However, the poor disengagement slightly worsened the blow-off.
However, compared to the 20cm attachment, it is within the acceptable range, so we were satisfied with the product.View Detail
Excellent
Muffled sound effectPeyton Place ShortContiWSilencer was louder than I expected, so I used it.
Before connecting to the Exhaust pipe, it could have been attached to the Slip-on Silencer and the length could have been 20cm.
After use, the volume is much smaller when idling, and I am satisfied that the bass is maintained. When driving, the sound is muffled to a certain extent, and I am satisfied with the somewhat mild sound.
However, After Fire did not subside before, so the Inner silencer could not handle it without a little more shedding or fueling.View Detail
Excellent
It worked there.I was dissatisfied with the volume and sound quality of Sharp Exhaust System made by Wills WIN which I installed, and installed this Baffle.
The "BALIBALI" sound is gone and the volume is a little milder and a little lower.
I put it in the original orientation and it was still the same, so I put it in the opposite orientation.
There was a little gap so I filled it with heat resistant Aluminum Tape and Liquid Gasket. The price was good because it was cheap.View Detail
Excellent
Accuracy is good and Exactly fit.I bought the Baffle beforehand so that it would not be pointed out by the volume at the time of inspection.
The HexBolt supplied with the Baffle is M5, so please check the diameter of the mounting holes on the Silencer side where it will be mounted, and you may need to extend the hole diameter if necessary.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING