27.52 EUR
(4,505 JPY)
24.83 EUR
(4,065 JPY)
(10% OFF)
4 (13 Reviews)
Excellent
Good tool if used as intended.This tool does what you're asked if you use it for its intended purpose. Bought it to hold the flywheel on my Honda crf250r while tightening the nut. Some mentioned that it failed and didn't do its job. Don't use it to change the oil filters in your car or put on your ex-girlfriend's tire and it should work just fine.I've used it on a few bikes, KTM and Honda it still looks and works as it should. I would buy it again as it's the right price for a tool you can use about 6 times in your life.shipping is very fast,well packaged, thanks webike.
Reviews For KITACO Pulley Holder From Other Webike User
Excellent
Versatile Holding Tool for your Maintenance NeedsAbout quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail
Average
Restraint deviceIn overhauling Clutch of SUPER CUB, a tool to fix Clutch became necessary. There were several kinds of tools to fix, but I chose Pulley holder which is tenacious for the time being
Clamp the Holder in Clutch, rotate the handle and tighten it to complete the set. I was able to remove it easily by putting pressure on Lock nut using exclusive Wrench. Clutch that was immersed in oil can also be fixed without slipping
I found out when using it, but Clutch still moves with just being caught in Pulley holder. So when detaching you must hold down the handle or hook it somewhere so as not to move. Naturally? - ω - `)View Detail
Excellent
It was able to be used without problemsPurchase for Clutch exchange.
Quality was also good and could be used without problems
The price is reasonable as it is
Because it can only rotate by 180 ° in the attached Lever
I felt uncomfortable with a small car like 4 MINI.
If the tip is hexagon etc. so that it can be used even with Spanner etc.
I thought it was more convenient to use.View Detail
Excellent
This can be used.I used it for desorption of Pulley of CYGNUS1YP.
Shaft is attached to the Handlebar part so that it can be tightly tightened, but if you tighten it with so much power, you can hold it firmly.
Initially, I wondered whether to become Universal wrench, but because the hooked part is deep, it is hard to use (Not available) Because there was information that it was made to Pulley holder. Results were purchased and correct answer was Large.
There is no place to use it, but the Red Rubber to hold it is weaker than we thought, it will be soooolid but it seemed like it was good to have bought it after a long time.View Detail
Average
Watch ImpreI watched Impre, I decided to buy it as a reference.
Good feeling because it can be used for Clutch exchange and Outer Rotor exchange.
Whether it's a little expensive or not.
I just pray that it will not break afterwards.View Detail
Most Viewed Reviews Of KITACO Pulley Holders
Excellent
Versatile Holding Tool for your Maintenance NeedsAbout quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail
Average
Restraint deviceIn overhauling Clutch of SUPER CUB, a tool to fix Clutch became necessary. There were several kinds of tools to fix, but I chose Pulley holder which is tenacious for the time being
Clamp the Holder in Clutch, rotate the handle and tighten it to complete the set. I was able to remove it easily by putting pressure on Lock nut using exclusive Wrench. Clutch that was immersed in oil can also be fixed without slipping
I found out when using it, but Clutch still moves with just being caught in Pulley holder. So when detaching you must hold down the handle or hook it somewhere so as not to move. Naturally? - ω - `)View Detail
Excellent
It was able to be used without problemsPurchase for Clutch exchange.
Quality was also good and could be used without problems
The price is reasonable as it is
Because it can only rotate by 180 ° in the attached Lever
I felt uncomfortable with a small car like 4 MINI.
If the tip is hexagon etc. so that it can be used even with Spanner etc.
I thought it was more convenient to use.View Detail
Excellent
This can be used.I used it for desorption of Pulley of CYGNUS1YP.
Shaft is attached to the Handlebar part so that it can be tightly tightened, but if you tighten it with so much power, you can hold it firmly.
Initially, I wondered whether to become Universal wrench, but because the hooked part is deep, it is hard to use (Not available) Because there was information that it was made to Pulley holder. Results were purchased and correct answer was Large.
There is no place to use it, but the Red Rubber to hold it is weaker than we thought, it will be soooolid but it seemed like it was good to have bought it after a long time.View Detail
Average
Watch ImpreI watched Impre, I decided to buy it as a reference.
Good feeling because it can be used for Clutch exchange and Outer Rotor exchange.
Whether it's a little expensive or not.
I just pray that it will not break afterwards.View Detail
Other Reviews From NO NAME
Very Good
Priced right and no damage to the adjuster.Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View Detail
Very Good
Great safety and looks productnice and shiny replacement for the old tattered cloth renthal pad i had for years.Pad fits well on ktm. I don't love the graphics but needed it to replace the one on the bike that was falling apart. Pretty stiff foam too. I'm not sure I want my face to hit it.I wanted to buy an original product instead of a poor quality fake.Price seems high for what it is.View Detail
Very Good
Great product, great upgradeMalfunctioned stock caliper on a so this was a better option to go than OEM.I didn't expect much when I bought it.First try was in the long ride and I wouldn't spend this much money for the extra performance if I didn't have to.That was a game changer, especially on steep downhills.Brake precision and overall performance is far better. Braking at speeds above 100km\h made a big difference.braking distance is now noticeably shorter.Worth every penny. Also looks better on the bike than I expected.View Detail
Very Good
A must have tool for any tool box.This tool comes in handy for all my little jobs and some big ones.The depth of insertion of the socket allows the optional setting of fixed and pivoting.it can be used as an extension bar.It is pretty sturdy and well made.The Japanese quality shines through, the feel in the hand is incredible. It's quick to use the handle is large enough to get a good amount of torque on the screw or nut being tightened. so far the tool has been very durable and not let me down while being used.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING