Yoshimura filer oil cap

Good replacement for the original plastic part.Nice color good quality and very light weight.Make sure order the correct diameter to fit your bike.View Detail

I recently installed the Yoshimura Oil Filler Cap Type-FB on my Kawasaki ZX-4R, and here’s my review:About quality and textureThe quality of the Yoshimura Oil Filler Cap is excellent. It’s made from durable materials, and the finish is smooth with a nice Yoshimura logo engraved on it. It looks high-end and adds a bit of a premium feel to the engine area. It doesnt come with a new O-ring though.About the feeling of useThe cap feels solid and well-made. It fits perfectly and securely, so I have no worries about leaks. Plus, it comes pre-drilled for safety wire, which is a great feature if you’re using it for track days or just want extra security.Products to buy togetherI would recommend pairing this with other Yoshimura parts, like their bar ends or frame sliders, to keep the look consistent across your bike. It’s a nice touch to have matching pieces.Difficulty of installationThe installation was super easy. You’ll need a 14mm socket to tighten it properly, and it only took me a couple of minutes to install. No special tools needed, and it fit perfectly with my ZX-4R.Cost performance and comparison with other productsIt’s a bit more expensive than basic oil caps, but the quality and design are well worth the price. Compared to cheaper options, the Yoshimura cap feels more solid and gives the bike a cleaner, custom look.About shipping and packagingShipping was fast, and the packaging was great. The oil cap came in a small, well-protected box, so it arrived in perfect condition without any scratches or dents.Any concerns, cautions, or advice when purchasingMy only advice is to make sure you have the 14mm socket ready for installation. Also, the pre-drilled hole for safety wire is a great bonus if you’re into track riding. Overall, it’s a small but excellent upgrade for the ZX-4R, both in terms of function and appearance. I’m really happy with it!View Detail

Perfect to replace the original plastic cap.You will need a tool to open and close it.Quality aluminum. Yoshimura obliges.View Detail

These oil filler caps are more usefull then you would initially think. The ability to torque them correctly helps prevent any venting or misting of oil from the filler on my track/race bike. They look really good with the usual Yoshimura quality. I miss the old works colour, but the grey still looks good.When installing these always use a barrier of some kind like tape, plastic or latex from an old workshop glove. This helps prevent damage on installation. Max torque is 8 - 10nm but more than that might cause some minor wear/damage, so ideally use a torque wrench.View Detail

Item arrived... quality built Is good...colour red..nice...took a while to arrive due to no stocks, overall very satisfying..never been disappointing..thank you team webike..more to come.View Detail

About quality and textureSoft PVC material with beautiful red sitches embroided on it. The cushion is softer but still firm the the stock seat.About the feeling of useMy bottom feels a bit tighter but no numbness feeling compared to the stock seat. I'm able to ride longer around 30 minutes to an hour or more without needed to stand. The passenger seat side tends to slide down to the rider. But it may not due to the seat material used.Products to buy togetherI bought a SW Motech rear seat bag. And it's able to fit at the passenger seat side.Difficulty of installationEasy direct replacement on both the passenger and rider side. The rider seat feels a bit hard to push in the seat initially. But after a while of sitting on it should be fine.Cost performance and comparison with other productsCost it's cheaper then the premium brands available on the market. Well made and the price is affordable even with shipping.About shipping and packagingThe passenger seat and the rider seat comes with a plastic cover which you can use for to keep the old stock seats. Both items are bubbled wrapped. Comes with a box from Suzuki.Any concerns, cautions, or advice when purchasingNo issues with the item so far. View Detail

About quality and textureMade of smooth aluminium texture. Feels good solid able to take impact without scratches.About the feeling of useAble to charge the watch without restriction. The magnet is of the charger can attach strongly. Straps of the watch are easier to remove compare with the older designs.Products to buy togetherMay need to buy a screen protector as it doesn’t come with one. But so far, I have used the same brand for my previous iWatches no issues with it without screen protector.Design to be able to take knocks without damaging the screenDifficulty of installationNo issues with installing with just four screws. But the rubber cushions may take time to install as it is very small.May not be essential to install them but better to, as an additional protection to the watch and help to hold the watch more stable.Cost performance and comparison with other productsCost a bit more then the common protective cases in market but few of them are made in the same material and designed with precision.About shipping and packagingComes with a box inside item is well protected with sponges and the box is bubble wrap by Webike.Any concerns, cautions, or advice when purchasingI prefer silver as the colour will not fade easily over time. And it has a more classic design compare with the other colours available. And I able to match with a classic metal band.View Detail

About quality and textureThe pull-out drink mechanism is made from plastic with spring back action.The back support of the drink holder is made from metal for good back support.The mount is metal material with plastic mount protector for your bars.About the feeling of useGood strong spring back action for the drink holder.I can put other items similar size as the drink. For example, a portable battery chargerProducts to buy togetherA bottle about less then a litre will be fine.Bottle or item size less the 9 CM will be fine.Difficulty of installationLess then 10 mins to install the item. The mount diameter is big. I try to mount on my crash bar have to install it without the plastic protector. But in the end I mount it on the passenger footpeg holder.But might have issue if want to mount on smaller diameter bar as not given various sizes protector.Cost performance and comparison with other productsPrice is reasonable compared to other brands. As its from Daytona.About shipping and packagingItem is box with plastic holder to prevent movement of the item. The box is well bubble wrap by WEBIKE.Any concerns, cautions, or advice when purchasingThe mount protector is not made of rubber instead it is made from plastic. May query about the ability of protection.Different size of protectors should be provided as well.View Detail

About quality and textureThe lock feels solid and not easy to temper with. Made by stainless steel, I guess.The wire is thick and not easy to temper with. The thickness of the wire is about 1CM.About the feeling of useI mount it on my handlebar. I turn it opposite upside down as I’m afraid when unlocking the lock might hit other parts of the motorcycle.It still works perfectly when it turned too.Products to buy togetherI opted for the item with wire as its only cost a bit more. The wire quality is good for the price.Difficulty of installationTook only about less then 10 minutes. Rubber protection is given to prevent scratches on the item mount.Cost performance and comparison with other productsDid not compare other similar brands but Daytona items are reasonable priced usually.About shipping and packagingWell bubble wrapped by WEBIKE, item itself comes with a box with plastic holder to secure item.Any concerns, cautions, or advice when purchasingThe lock numbers are abit difficult to see as it’s a bit small and with reflective background. Maybe it’s my eyesight problem ^^”,View Detail

About quality and textureWell made brushed polished aluminium container. The quality feels good as I believe is made in Japan.About the feeling of useLooks great without the plastic container and bracket popping out look. Looks more cleaner without it sticking out. Lesser distraction.Products to buy togetherI fitted on my RCS coracorta 17mm brake pump.Difficulty of installationIt took a while for my mechanic to figure out and took about an hour the most. Cost performance and comparison with other productsPrice and quality is justifiable. Even though we have a more expensive brand which just doesn't make sense in the price.About shipping and packagingWell bubble wrapped with all the items. Smaller items are inside a small ziplock bag. No issues when I received the item.Any concerns, cautions, or advice when purchasingThe top cap cannot be using other brands I guess. There's no window in the container to view the brake fluid level. But still there's no leakage when I using it so far. View Detail