Two of these turn signal bulbs are also needed for my turn signals that I am refreshing

About quality and texture, I can confirm that the quality is great and that the material used for the lens is PMMA (polymethylmethacrylate) with a orange tint.About the feeling of use, Two turn signal lenses were needed for my turn signals that I am refreshing from newly purchased parts from Honda. This part number turn signal lens is used on the front right and also the rear left turn signal. and has done it's job protecting and emphasizing the bulbs operation.Products to buy together, While working on refreshing the original turn signals I would take the opportunity to also add the turn signal bulbs to your cart to help minimise failures after reassembly.Difficulty of installation, I can say the fitment of the lens for my installation was very easy due to the simplistic design of how the lens secure to the turn signal housing with a clip and a screw.Cost performance and comparison with other products, The pricing of the product is godd. You receive a single lens that is of great quality. The pricing of aftermarket lens sets available are much cheaper but with either clear or tinted lenses and coloured bulbs.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used for the lens is PMMA (polymethylmethacrylate) with a orange tint.About the feeling of use, Two of these turn signal lenses are also needed for my turn signals that I am refreshing from newly purchased parts from Honda. This part number turn signal lens is used on the front left and also the rear right turn signal. and has done it's job protecting and emphasizing the bulbs operation.Products to buy together, While working on refreshing the original turn signals I would take the opportunity to also add the turn signal bulbs to your cart to help minimise failures after reassembly.Difficulty of installation, I can say the fitment of the lens for my installation was very easy due to the simplistic design of how the lens secure to the turn signal housing with a clip and a screw.Cost performance and comparison with other products, The pricing of the product is godd. You receive a single lens that is of great quality. The pricing of aftermarket lens sets available are much cheaper but with either clear or tinted lenses and coloured bulbs.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

This was a part that I have changed before on many bikes. Luckily, these are available to buy easy enough so you won't get stuck. I checked Honda schematics for the right one for the CBF500 2013 and the price was really good. I know you could probably use some rubber washers but then the fitment would probably not work as it should. Anyway, with a few other parts already in my basket I had it all shipped using EMS. I use this courier as they are fast and efficient and my orders arrive on time and in perfect condition. The rubber mounting was inside a well presented Honda packet and was also inside a bubble wrap envelope that Webike warehouse had made. The rubber is strong and slightly rigid but does have some flex to it as needed. Cannot really fault the moulding process on this part at all. Perfect. With most rubber parts, before fitting if possible, I tend to put them in some hot water to make them more supple and easier to fit. This was the case here. Everything aligned as it should and once fitted, the indicator (winker) stayed exactly where it should. As I said, there is some flex but that is good as these often get caught and you really don't want the indicator to break off. All in all, very happy with the purchase. Thank you Webike View Detail

I ordered this item and was worried as there is no picture, however, as long as the part code is right what you see on other websites is the exact part you will recieved form webike. I was surprised how quickly the item arrived form Japan to the uk I've waited longer for something to arrive from the EU. Part was will packaged and fits as expected, I would be from this site again.View Detail

About quality and texture, I can confirm that the quality is great and that the material used for the bulb is glass, metal for the base and tungsten for the dual filaments. About the feeling of use, Two of these turn signal bulbs are also needed for my turn signals that I am refreshing from newly purchased parts from Honda. This part number turn signal bulb is used on the front left and also the front right turn signal and has done it's job illuminating commands from from the switch block. Products to buy together, While working on refreshing the original turn signals I would take the opportunity to also add the gasket seal for the lens to your cart to help water ingress after reassembly.Difficulty of installation, I can say the fitment of the bulb for my installation was very easy due to the simplistic design of how the bulb is accessed and secure in the turn signal housing.Cost performance and comparison with other products, The pricing of the product is great. You receive a single bulb that is of great quality. The pricing of aftermarket bulbs can be cheaper buld the lifespan maybe shorter. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is stainless steel sheet with intergrated bracketry and included hardware to secure to the frame.About the feeling of use, Beautifully designed stainless steel right side cover that is well suited to a original styling Honda Monkey 125. Styling of this JB03 side cover is preferred over the JB02 side cover from the same brand. Products to buy together, Another product for you to consider also adding to your cart would be a metal chain guard to further add to the shiny metal finished parts on the Monkey 125 and the product from Piranha is well matched in style and pricing.Difficulty of installation, I can say the fitment of the side cover was very easy due to integrated brackets that attach the cover to the frame are simple to align and position the cover before securing with the supplied fasteners.Cost performance and comparison with other products, The pricing of this product is great as you are receiving a right side cover made using quality stainless steel material. There are no cheaper priced ight side covers available.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a combination of cast aluminum for the clutch cover and machined aluminum for the oil filter cover.About the feeling of use, I find the Kitaco clutch cover the best option for add an oil cooler to your JB03 Monkey 125. The styling of the clutch cover and silver painted finish is well suited to the rest of the engine.Products to buy together, Adding an adjustable clutch lever to your cart to help personalization your clutch lever setup position woud be ideal.Difficulty of installation, I can say the fitment of the clutch cover kit for my installation was average, there is special tooling needed and the process of removing the unwanted original Honda parts, transferring some over and installing the new Kitaco parts takes some time.Cost performance and comparison with other products, The pricing of this product is great when compared to all the other JB02 aftermarket clutch cover kits available because it is a less complex design and you utilising some of the original clutch cover parts.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used is cotton gauze and steel for the filter material. About the feeling of use, Specifically designed oil filter for your JB03 Monkey 125 works out perfect for an oil and filter service on the new Honda clutch cover. Products to buy together, A higher flow and cleanable air filter panel to fit to the original airbox would be ideal to also add to your cart to maximise performance from the original airbox and minimise the cost of replacement air filter elements in the future. Difficulty of installation, I can say the fitment of the oil filter or my installation was easy due to the ease of access and simple nature of securing the oil filter directly to the new styled clutch cover from Honda. Cost performance and comparison with other products, The pricing of this product is great, cheaper then other oil filters for the JB03 Monkey 125 that are available. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a mixture of carbon fiber, machined aluminum and stainless steel for the muffler and stainless steel for the pipe. About the feeling of use, The stainless steel muffler with tip looks slick against the red paint on the bike and the noise level of the exhaust is too loud for me at the higher speeds with the insert removed so I am leaving the insert fitted which helps generate a much more enjoyable noise level. Products to buy together, Tyga Performance have a hugh range of parts for the Monkey 125 and some more carbon fiber parts against the red paint would be ideal so adding the airbox covers in carbon fiber to the cart will be the first. Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from the muffler mount to the spring retainers lined up perfectly. Cost performance and comparison with other products, The pricing of the product is great. You receive an exhaust system that is made using high quality materials and has high quality surface finishes. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is cast aluminum. About the feeling of use, Just one of these right crankcases was needed for the new engine that I am building from newly purchased parts from Honda. It has done it's job as one of the main structure of the engine, housing all the components.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the two most important to go with the right crankcase are the left crankcase and eleven 60mm flange bolts as they all work together on the installation.. Difficulty of installation, I can say the fitment of the right crankcase for my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual which is to be secured by bolts and tightened in a crisswise pattern to a required torque value.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda right crankcase that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere.. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail