Genuine Honda Winker Mounting Rubber for CBF500 2013

About quality and texture, I can confirm that the quality is great and that the material used for the lens is PMMA (polymethylmethacrylate) with a orange tint.About the feeling of use, Two turn signal lenses were needed for my turn signals that I am refreshing from newly purchased parts from Honda. This part number turn signal lens is used on the front right and also the rear left turn signal. and has done it's job protecting and emphasizing the bulbs operation.Products to buy together, While working on refreshing the original turn signals I would take the opportunity to also add the turn signal bulbs to your cart to help minimise failures after reassembly.Difficulty of installation, I can say the fitment of the lens for my installation was very easy due to the simplistic design of how the lens secure to the turn signal housing with a clip and a screw.Cost performance and comparison with other products, The pricing of the product is godd. You receive a single lens that is of great quality. The pricing of aftermarket lens sets available are much cheaper but with either clear or tinted lenses and coloured bulbs.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used for the lens is PMMA (polymethylmethacrylate) with a orange tint.About the feeling of use, Two of these turn signal lenses are also needed for my turn signals that I am refreshing from newly purchased parts from Honda. This part number turn signal lens is used on the front left and also the rear right turn signal. and has done it's job protecting and emphasizing the bulbs operation.Products to buy together, While working on refreshing the original turn signals I would take the opportunity to also add the turn signal bulbs to your cart to help minimise failures after reassembly.Difficulty of installation, I can say the fitment of the lens for my installation was very easy due to the simplistic design of how the lens secure to the turn signal housing with a clip and a screw.Cost performance and comparison with other products, The pricing of the product is godd. You receive a single lens that is of great quality. The pricing of aftermarket lens sets available are much cheaper but with either clear or tinted lenses and coloured bulbs.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

I ordered this item and was worried as there is no picture, however, as long as the part code is right what you see on other websites is the exact part you will recieved form webike. I was surprised how quickly the item arrived form Japan to the uk I've waited longer for something to arrive from the EU. Part was will packaged and fits as expected, I would be from this site again.View Detail

About quality and texture, I can confirm that the quality is great and that the material used for the bulb is glass, metal for the base and tungsten for the dual filaments. About the feeling of use, Two of these turn signal bulbs are also needed for my turn signals that I am refreshing from newly purchased parts from Honda. This part number turn signal bulb is used on the front left and also the front right turn signal and has done it's job illuminating commands from from the switch block. Products to buy together, While working on refreshing the original turn signals I would take the opportunity to also add the gasket seal for the lens to your cart to help water ingress after reassembly.Difficulty of installation, I can say the fitment of the bulb for my installation was very easy due to the simplistic design of how the bulb is accessed and secure in the turn signal housing.Cost performance and comparison with other products, The pricing of the product is great. You receive a single bulb that is of great quality. The pricing of aftermarket bulbs can be cheaper buld the lifespan maybe shorter. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used for the bulb is glass, metal for the base and tungsten for the filament. About the feeling of use, Two of these turn signal bulbs are also needed for my turn signals that I am refreshing from newly purchased parts from Honda. This part number turn signal bulb is used on the rear left and also the rear right turn signal and has done it's job illuminating commands from from the switch block. Products to buy together, While working on refreshing the original turn signals I would take the opportunity to also add the gasket seal for the lens to your cart to help water ingress after reassembly.Difficulty of installation, I can say the fitment of the bulb for my installation was very easy due to the simplistic design of how the bulb is accessed and secure in the turn signal housing.Cost performance and comparison with other products, The pricing of the product is great. You receive a single bulb that is of great quality. The pricing of aftermarket bulbs can be cheaper buld the lifespan maybe shorter. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

I have not had one of these bikes in for quite some time now. This came in for a service to the calipers and replacement brake pads. Not a massive job but very important none the less. Finding the right pads for this old girl was not too bad as I just used the tools on the help pages Webike provide. I also cross referenced with Yamaha schematics for my own peace of mind. The pads were really good value and a lot cheaper than I could source locally. Shipping was awesome, and EMS got my package delivered in 7 days. The pads were well wrapped and packaged and no damage at all was sustained during transit. They came in the Yamaha packaging also. They are nothing really to look at but the test will be after fitting and bedding for a couple of hundred miles or so. Top quality brake pads from one of the top manufacturers. Thanks Webike for provided great services. View Detail

There was a bit of an issue with the dust seal on the rear of this bike which I wanted to swap out. It was ok but not what I want on a bike which was this young. I found the right part by using the tools Webike provide on their help pages and then cross referencing on Yamaha schematics for my own peace of mind. The dust seals do actually fit a few other models so seems to be in stock on Webike website. The cost of these are really good value and better than could be sourced locally. Although they are not expensive, I did want a few other small parts for other bikes so I decided I would buy all together. In 7 days from being shipped, my order arrived. The dust seals came in the standard Yamaha packet and were wrapped up. The seals are really flexible but they do feel really strong and I was able to manoeuvre them into place relatively easily. A very small part but worth the effort involved to make sure the seals are good. Pleased with the purchase, thank you Webike for your hard work. View Detail

This little bike came in for a bit of a spruce up after being neglected for 2 years. There were various parts that had been attacked by some critters and the steering handlebar protector was one of these. We could have got an after market one but the customer wants to keep this as original as possible. I did hunt around a bit for one of these locally but no one had them in stock. I searched for the right pad by using Yamaha schematics and the PW50 page. Webike luckily had this in stock and ready to ship within 24 hours. I had 2 other items in my order which were all shipped using EMS. In just 7 days the entire order arrived. The outer box was sealed with cello tape to keep everything inside. The handlebar protector was actually inside a Yamaha packet but also inside a bubble wrap envelope that Webike warehouse made. The protector is a lovely moulded sponge/foam one. The shape is precise and is very pleasing on the eye. The quality is really good too. The foam is super tough as it does need to be. Fitting is simply a push fit and way you go. Now this bike has had the little bits added back, it looks pristine once again. Thanks Webike, very happy customer. View Detail

A little refresh on the rear caliper of this older bike was due and a couple of the parts were needed. One of these included a new slide pin as the old one was worn and notched. The end was also a little chewed up after multiple removals. I found the right part by searching through Yamaha schematics for this model and year. The slide pin was easily gained using this method. Webike did have 2 of these in stock at the time of ordering so there was no wait time at all. The price was really good value too which made this order even sweeter. In just 7 days from being shipped the order arrived. The outer box was secured with tape all the way around. The inner contents were packed out using bubble wrap and everything was in perfect condition. The slide pin itself came in the standard Yamaha packaging. Yamaha have not really changed this method of securing the brake pads on the rear calipers for a long time during this period, my only gripe is that they could have made the finish a little more pleasing to the eye. The finish itself is just a plain sating black with no additional customisation for looks. Anyway, once fitted the job was complete and did the trick. Great work and thank you Webike. View Detail

I had been looking to spruce up this Monkey when it came in with a genuine Honda Monkey emblem on the right panel of the bike. Yes, I could get them printed at a local store but why do that when you can get hold of the genuine Honda ones as cheap as this. Not a hard part to find once you know the size you need and a rough model of bike that this is for. This was the side panel emblem which did not need to be the exact same as the other side as I was also buying the left hand side anyway. Along with the left hand side decal and some other parts, all shipped together by EMS and delivered in 7 days. Everything in the package was packed neatly and securely and these were kept flat as you don't want bent emblems. They look super slick and crisp edges makes the world of difference. This genuine Honda Monkey emblem is a gorgeous black outer edge with accents of red to go with the bike's colour scheme, the inner is crisp white. It is a flat but slightly gel looking decal/emblem and all the colours are super clean too perfect. I have had some in the past for other bikes that look slightly grey on the black part but not these, perfect match for the bike colour scheme. Now this is on, the bike looks like a proper machine. Thanks Webike for providing items that are hard to get here in the UK. View Detail