XRMOTARD requires processing.

Super satisfied, although it is very expensive, because the package arrived in Romania... I had to pay VAT and shipping from the post office to my home.I installed it on my Kawasaki Vn 900 Classic/2016, it has a very beautiful and powerful light, much better than the original halogen...Let's see how it will be after I adjust the headlight, for the road and safer on the first exit to the road, at night, I will come back!!!View Detail

I bought two M&H Matsushima led headlight bulbs for my 2014 HONDA MSX125 and got them installed. The brightness is less than that of OEM bulb. Horizontal projection angle is not wide enough, so I got back to the OEM bulb. Sorry. I do not recommend this bulb and gives two stars for the overall rating.View Detail

I'm useing for Honda Giorcub, but the headlight bulb was too long, and I cut the end. Not heating, not flashing. It1s very good for my bike.View Detail

About quality and texture
Было куплено две лампы для применения в своих скутерах, не хотелось, чтобы были дополнительные блоки и провода, эта лампа включает в себя все нужные компоненты, стабилизаторы и драйвера для управления мощными светодиодами, простая установка без лишних проблем

About the feeling of use
После установки в стандартное место и запуска двигателя лампа сразу включилась и начала корректно работать, на холостых оборотах около 1800-2000 присутствует небольшое мерцание света, но производитель предупреждает об этом заранее, так как это особенность работы при переменном токе, далее при наборе оборотов мерцание изчезает и мы видим ровный свет с температурой 6000К, это правда, цвет сине-белый, как и должен быть, достаточно яркий и хорошо освещающий дорогу даже на ближнем свете
Ближний свет на это лампе использует 2 LED с каждой стороны лампы, а дальний все 4 LED на каждой стороне
Стоит отметить, что дальний свет не просто яркий, а слишком яркий и без настройки фары обойтись никак нельзя

Products to buy together
Совместно с лампой ничего покупать не требуется

Difficulty of installation
Легчайшая установка на место стандартной лампы, полная совместимость продуктов

Cost performance and comparison with other products
Цена ниже, чем лампы более высокого класса с дополнительными блоками, однако, разница не так велика, яркость достаточна для скутера и передвижения ночью

About shipping and packaging
Упаковка производителя есть мягкий блистер, но с перевозкой проблем не возникло, повреждений не было замечено

Any concerns, cautions, or advice when purchasing
Всегда осуществляйте настройку фар после установки подобного типа LED ламп, иначе помимо плохо освещения дороги возможно ослепление встречных водителей
----------------------------------------------------------About Quality and TextureTwo lamps were bought for use in their scooters, I did not want to have additional blocks and wires, this lamp includes all the necessary components, stabilizers and drivers to manage powerful LEDs, a simple installation without unnecessary problemsAbout the Feeling of UseAfter installing in the standard place and starting the engine, the lamp immediately turned on and began to work correctly, at idle about 1800-2000 there is a slight flicker of light, but the manufacturer warns about this in advance, as this feature of the work at alternating current, then the flicker from the speed of revolutions. And we see a smooth light with a temperature of 6000k, it is true, the color is blue-white, as it should be, a fairly bright and well illuminating road even in the near lightThe near light on this lamp uses 2 LED on each side of the lamp, and the long -range all 4 LED on each sideIt is worth noting that the high beam is not just bright, but too bright and without tuning the headlight can not do in any wayProducts to Buy TogetherTogether with the lamp, nothing needs to be boughtDifficulty of InstallationThe lightest installation in the place of a standard lamp, complete compatibility of productsCOST Performance and Comparison with Other ProductsThe price is lower than the lamps of a higher class with additional blocks, however, the difference is not so great, brightness is sufficient for a scooter and movement at nightABOUT SHIPPing and PACKAGINGThe manufacturer’s packaging is a soft blister, but there were no problems with transportation, no damage was noticedAny Concerns, Countions, Or Advice When PurchacingAlways set up headlights after installing this type of LED lamps, otherwise, in addition to poorly lighting the road, it is possible to blind oncoming driversPowered by Google TranslatorView Detail

About quality and texture
Было куплено две лампы для применения в своих скутерах, не хотелось, чтобы были дополнительные блоки и провода, эта лампа включает в себя все нужные компоненты, стабилизаторы и драйвера для управления мощными светодиодами, простая установка без лишних проблем


About the feeling of use
После установки в стандартное место и запуска двигателя лампа сразу включилась и начала корректно работать, на холостых оборотах около 1800-2000 присутствует небольшое мерцание света, но производитель предупреждает об этом заранее, так как это особенность работы при переменном токе, далее при наборе оборотов мерцание изчезает и мы видим ровный свет с температурой 6000К, это правда, цвет сине-белый, как и должен быть, достаточно яркий и хорошо освещающий дорогу даже на ближнем свете
Ближний свет на это лампе использует 2 LED с каждой стороны лампы, а дальний все 4 LED на каждой стороне
Стоит отметить, что дальний свет не просто яркий, а слишком яркий и без настройки фары обойтись никак нельзя

Products to buy together
Совместно с лампой ничего покупать не требуется

Difficulty of installation
Легчайшая установка на место стандартной лампы, полная совместимость продуктов

Cost performance and comparison with other products
Цена ниже, чем лампы более высокого класса с дополнительными блоками, однако, разница не так велика, яркость достаточна для скутера и передвижения ночью

About shipping and packaging
Упаковка производителя есть мягкий блистер, но с перевозкой проблем не возникло, повреждений не было замечено

Any concerns, cautions, or advice when purchasing
Всегда осуществляйте настройку фар после установки подобного типа LED ламп, иначе помимо плохо освещения дороги возможно ослепление встречных водителей
----------------------------------------------------------About Quality and TextureTwo lamps were bought for use in their scooters, I did not want to have additional blocks and wires, this lamp includes all the necessary components, stabilizers and drivers to manage powerful LEDs, a simple installation without unnecessary problemsAbout the Feeling of UseAfter installing in the standard place and starting the engine, the lamp immediately turned on and began to work correctly, at idle about 1800-2000 there is a slight flicker of light, but the manufacturer warns about this in advance, as this feature of the work at alternating current, then the flicker from the speed of revolutions. And we see a smooth light with a temperature of 6000k, it is true, the color is blue-white, as it should be, a fairly bright and well illuminating road even in the near lightThe near light on this lamp uses 2 LED on each side of the lamp, and the long -range all 4 LED on each sideIt is worth noting that the high beam is not just bright, but too bright and without tuning the headlight can not do in any wayProducts to Buy TogetherTogether with the lamp, nothing needs to be boughtDifficulty of InstallationThe lightest installation in the place of a standard lamp, complete compatibility of productsCOST Performance and Comparison with Other ProductsThe price is lower than the lamps of a higher class with additional blocks, however, the difference is not so great, brightness is sufficient for a scooter and movement at nightABOUT SHIPPing and PACKAGINGThe manufacturer’s packaging is a soft blister, but there were no problems with transportation, no damage was noticedAny Concerns, Countions, Or Advice When PurchacingAlways set up headlights after installing this type of LED lamps, otherwise, in addition to poorly lighting the road, it is possible to blind oncoming driversPowered by Google TranslatorView Detail

Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail

?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail

I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail

Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail