21.17 EUR
(3,450 JPY)
4 (7 Reviews)
Very Good
Purchase RepeatI have been using it on my Ninja 1000 and found it to be sturdy and stable, so I decided to install it on my CUB as well.
Since the Meter visor with Bracket has already been installed on the CUB, the Quantity visor is installed on the Bracket part of the CUB.:Set
The U-shaped clamp came with two sizes, Large and Small, but the Small one was just right.
Quantity of all Arm and Mount (sold separately):When set, it is a little too large and tough for the CUB, but you can drive without worrying about it coming off!
Impressions of the Ram Mount purchase & darr;
https://imp.webike.net/article/453185/
Meter visor is this! ↓
https://www.webike.net/sd/24105239/
Meter visor imprints & darr;
https://imp.webike.net/article/505612/
Reviews For RAM MOUNT U-shaped clamp Zinc coated bolt From Other Webike User
Very Good
For ActionCameraBuy for ActionCamera and Navigation mounting
I already have it installed on my One Side, but bought it to install both ActionCamera and Navigation.
I hope it will be a record for Touring.View Detail
Excellent
Can be combined with parts for SystemUpThere is a wide variety of parts that you can combine and system up as you wish, so you can clamp what you want in the position and angle you want. The price of the parts is reasonable and the cost performance is satisfactory.View Detail
Very Good
Nut is recommended for purchase at Home Center.Because I had YamatoCenter deliver to the destination of expedition, it was necessary to purchase Wrench at DaaSaw and the like because the hex size of Nut is 11mm as it is mentioned in the review of other people. However, when I look at the one which arrived, it may be called with Pilot, I cannot be installed in Handlebar because size does not fit in the first place with the one of Non-Penetrating as it is. What's going on with this? I had no choice, so I went to the home center's Koen PRO to find a nut that would fit. As a result, the nut of 1/4 was fit. Because most of the hexagonal size of Nut sold in Homsen is 10mm, it can be removed with general wrench. The thing itself is no problem at all, but it is a little difficult to insert the U-shaped clamp into the hole. But it came with some kind of grease to put in there. So I can recommend it, but I recommend you to buy it at Home Center for Nut only.View Detail
Excellent
I don't feel safeThis product was recommended to me by a friend of mine, but I've been buying it for Firmly and Case until now I was worried that the smartphone holder is not suitable for this type of smartphone I couldn't change to a smartphone holder with a pinch type
However, when I switched to this Ram Mount, I realized that the price is a little high, but the performance is worth it I could
I don't have to worry about slipping and shifting when driving on the highway or in the rain You can't stop the smartphone from being pinned down, but you can use it to stop the smartphone on top of it I think it is unlikely to be dropped because it is attached to the Seat of Rubber
The joint part can be changed by loosening the bolt that can be turned by hand, but the handlebar One pcJoint is placed between the point where the smartphone is fixed to the With the arm in between, you can adjust the position to suit you without shifting the fixed point You can
However, although the range of motion is wide, the orientation is related to the orientation of the Clamp that secures it to the bar It is better to have an image of the image you want to use before you install it I think
Moreover, I had attached it directly to the Handlebar at the time of purchase, but the Handlebar I bought the Brace and put it on there so I have more freedom than I ever had before
And the Type to put the Smartphone in the Case of the Type that I was using until now The difference between the two is that the body directly touches the controls when you stop and operate the device Easy to operate
The Smartphone used to get hot very quickly, but it would get hot and stuffy The smartphone no longer gets hot
It's important to note that it will get wet directly in the rain, so it is not waterproof It's about the only place where you have to be careful about the weather when using your Smartphone!View Detail
Excellent
FirmlyHoldI am using it for Handlebar of CB 400 SB. (Using Spacer)
Nut for fixing is probably Inch size, so ginger can be substituted with 11 mm Spanner.
Please note that at this time, be sure to prepare Spanner.
Nut and Rubber's Ball part are too close, so you can not enter Socket or Double-end Wrench.
Installation is completed if you tighten it strongly to the extent that it is not tame.
Ram Mount is very affordable and very strongly fixed to me.
Moreover, if you change the tip Parts, you can use it for various purposes such as smart Holder, NavigationHolder, CameraHolder.
It is a mount tool of Recommendation.View Detail
Most Viewed Reviews Of RAM MOUNT Other Action Camera Options / Repair Parts
Excellent
very strongI installed the Ram Mount M8 bolt holes with 1" ball directly on the handlebars of Ducati StreetFighter 1098S. I installed the Ram Mount ball with M8 bolt, bolt holes made from aluminum so it's very strong.View Detail
Excellent
Good camera mount, high quality that lasts!The RAM Mounts designed for the GoPro do not come with the GoPro thumbscrew or the stainless acorn nut as depicted in the photographs. Instead, they ship the GoPro adapter with a nylock nut, a tiny machine screw, and a washer expecting this to be used in lieu of the GoPro thumbscrew. One can easily re-use their thumbscrew, but the Acorn nuts have to be swapped over from leftover GoPro mounts or purchased, but they are not retained in the RAM GoPro adapters! This allows the nuts to be easily lost.The rubber balls on the RAM mounts combined with the stout center assembly are the biggest selling points of the RAM mounts. It puts the other brands to shame! However, I am not a big fan of the sheet metal screws used to attach the ball assembly to the base. I could understand if it was lean manufacturing to reduce the number of specialized adapters, but almost all of the RAM mounts use the ball assembly. It would have been more secure and practical to produce an integrated ball assembly for each of the bases. That way I could still swap between mounts but bypass the need for the 2 sheet metal screws that could strip out the plastic or fail over time.I would have liked to see the ball assembly integrated into the suction cup mount. I also would have liked to see the thumbscrew included, or at least provide an acorn nut or nylock nut that is retained in the plastic GoPro adapter. This way the end user can simply reuse the GoPro thumbscrew without digging around for extra nuts. The machine screw included with the RAM mount is a smaller diameter that isn't as secure as the GoPro screw, and as a result the included nylock nut (which is too small to retain in the housing anyhow) has a smaller thread diameter that does not allow the use of the GoPro thumbscrew. It's almost as if RAM designed the GoPro adapters as a secondary after thought.I do like the twist lock suction cup mount. It provides a sturdy camera mount on glass or smooth surfaces, and the double socket arm is very secure and adjustable.Overall: 4/5 stars. I don't like how RAM included the GoPro adapter without proper hardware. The use of sheet metal screws to secure the ball assembly to the base is also cheaply done. It should have been integrated from the get-go and still allow for lean manufacturing principles. Otherwise it is a very solid mount.View Detail
Excellent
stable and without shakingI put RAM MOUNT Gopro ball mount 1" and RAM Mount short arm palstic in the DJI action camera and installed it on my Ducati StreetFighter 1098. During driving the RAM MOUNT is very stable and without shaking.View Detail
Excellent
实用的小配件我的摩托车手机支架是RAM,RAM的支架很容易被拆卸,车停放在外面的话,别人一拧就拿走了,损失挺大的。所以我在webike上购买了这个RAM MOUNT RAM 塑料臂锁,锁紧以后必须要使用配套的盖子拆卸,保护手机支架的安全。View Detail
Excellent
RAM MOUNT Security Knob for 1.5-inch Ball Arm因为配的是RAM的手机导航支架,平时怕麻烦基本上也懒得拆卸,但是如果别人想拿走的话也方便,丢了的话就是几百块没了,就配了这个专用的防盗锁。看材质用料也不错,价格也不算贵,而且拧得很紧,速度就算是上150多也不会松动,很紧很稳。平时不用的话也可以挂在钥匙扣上面,如果买了RAM的手机支架建议配一个防盗锁很方便。----------------------------------------------Because with a RAM cell phone navigation stent, usually basically do not bother to trouble removal, but if someone wanted to take the words are easy to lose, then that is a few hundred pieces did not, on the allocation of the special anti-theft locks. Look at material material is also good, prices are not expensive, and tighten very tight, even if the speed of more than 150 will not loose, very tight very stable. When not in use, then you can hang the keychain above, if you buy a cell phone holder RAM recommended anti-theft lock with a very convenient.Powered by Google TranslatorView Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING