?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
What made you decide to buy?
I bought this product because I was advised by my friends that I should have a hand guard for off-road racing. I've never used a hand guard before, so I didn't know how to choose one, and I chose this one because the price was cheap and the reviews didn't look too bad.
How was your experience with it?
I fell many times during the off-road race and the hand guard did not break and protected the lever very well.:It's Plastic, but it seems to have some strength to it.
Also, Material that seems to have strength.:Being lighter than the aluminum Hand guard, the Handlebar also felt lighter to handle.
Was the installation difficult?
I put the hand guard on for the first time, and it was Large strange to fasten the clamp part while dodging the wiring and so on.
【Please tell me the installation point and hang】
At first, the clamp part didn't fit on the Handlebar at all and I was in a hurry, but it's plastic and flexes well, so you can bend the hand guard to fit the shape of the Handlebar without any problems.
[Was the Instruction Manual easy to understand?
The instruction manual is in English version, so I don't understand the explanation well. I was able to install it with only a diagram because there is a diagram in every process.
[Included Parts:were they on?
All the necessary parts for installation are included, and the inner diameter of the handlebar is wide enough to fit most large handlebars.
[Was there anything that disappointed you?
None in particular. The strength was enough for the price, so I'm satisfied with the cosmetics.
Do you have any wishes or improvements you would like to make for the Manufacturer?
It's a foreign product, so I thought it would be like this.
[Do you have any products to compare it to?
None because it's my first product.
? Reason for purchase
When riding off-road on the KTM Free ride 250R, you can put your hands on stepping stones, trees, etc I was looking for a Hand guard to protect me from
The conditions for doing so are There's no core in the genus Gold stuff
In the past, when driving off-road, such as with Enduro, we have had to use the It is equipped with a Hand guard of the type to protect with aluminum or other I did
However, it's only because of the considerable weight of the Gold genus, which makes the Handlebar feel heavier and I was very tired when I was running on the rough terrain where the Handlebar often swung I did
Therefore, this product was chosen because it is light but has a certain degree of protection performance Installed
To prepare for Brake/ClutchLever damage due to a fall, the ARC's unbreakable Lever(Material):Plastic) would not be a problem to install, it was decided that it would be fine
? installation
A normal Pipe Handlebar should be able to be installed with no problem
I used a bolt for Clamp and Handlebar End Therefore, I installed the Pierced Type Grip which has a hole at the end in advance It's easy to leave behind
Depending on the type of vehicle, such as a TRAIL vehicle that has a lot of switches, there may be a Switch box or a MASTER You may need to fine-tune the position, etc
? feeling of use
We were able to achieve both a light handlebar feel and protection at the same time It was
Clearance with Lever etc. is also sufficient for 1 or Quantity:The 2pc finger control felt fine for Space, even with 4 fingers, of course
For Small stones from the car in front and Small branches on the woodland course, etc Protection performance is also adequate
However, unlike the Hand guard made of the Gold genus, it will break in the event of a fall (Lol)
I've seen this product in clean, unbroken condition, as I usually fall down multiple times in one race It was only once ^^^;
I understand that this is just the nature of the product
Well, the price is so low that I had to replace it several times when I reached the limit of the Repair
In general, I'm happy with the cosmetic results and the color of the Orange matches the Frame So I like the OEM PowerParts feelView Detail
I installed it in the TDM 900 and already love it for about 10 years since I bought it.
The hardest thing about Riding in the cold season is the cold of the limbs. So, I installed a Grip heater on a thick Winter Gloves, and it will be, but when I run on a highway, the degree of cold weather protection is so cold that there is no effect.
I think that wind protection measures are more important than anything to prevent cold in Motorcycle. Recently many ManufacturerOEM's Knuckle guard has been lineuped, but Universal products are not so many.
Also, OEM's Knuckle guard is often undesirable in Design.
Poly sports's Knuckle guard is almost mountable if it is a Pipe Handlebar Motorcycle and design is also Sharp so I think it will fit various Motorcycles.
Although it is not a very large Guard, it is Large enough to hide his hands, and the running wind is surely prevented.
Even if installation is somewhat uneven, because it is universal, I think that if you make delicate adjustments Large I think many things are durable, but if you need to prepare Spacer separately, such as Washer and Color.
Also, when installing this Guard, depending on the shape, I think that OEM's Bar End will be unusable.
Quality has been used for more than 10 years, but there are no cracks, no cracks, no color fading has occurred. I think that it is a Knuckle guard that not only adaptive Motorcycle and MOTARD series but also SportsNAKED suits.View Detail
I never expected to find the Poly sports hand guard repair parts I was looking for on Webike.
I was thrilled because I had given up halfway through.View Detail
Originally, it was a round line SEROW, so I really liked the matching round design of this product.
There is no interference with the wiring around the handlebar because the mounting bracket is U-shaped. It can be installed without any problem.
I'm not sure if this is the case with the SEROW itself. The brake hose is assembled parallel to the Handlebar, so I think other products will have the same situation.
I installed a bracket on the front fork of the brake side to prevent the guard from coming up when the bike falls. I made a bracket for the front fork bolt.
I don't know how useful it is, but I think it's Large durable enough for low impact falls.
The product is made in Portugal, solid, beautiful, and the plastic guard is thick and sturdy.
I'm going to run only Flat forest roads for a while to avoid wearing Wound (lol)View Detail
It was cold, so I warmed up with Dryer to prevent the plastic from cracking. It was cold, so I worked with Dryer to warm up the plastic so that it would not crack.
My RALLY50 had a grip heater from the moment I bought it, and the handlebar was open end, so I didn't have to modify it.
It doesn't weigh much, so I didn't feel uncomfortable handling it at all.
The only thing is that theAdapter is a little bit sweet, or the quality is bad, or the way you put it on is bad, or it seems to come loose…wow? I think it's like this.
Well, I guess the worst that can happen is that I'll just buy another Adapter and be done with the costumes!
Two-tone color Guard in White and Black will fit RALLY50, I think!View Detail
The car is a CRF250M and the Handlebar is used for ZETA's CX Handlebar.
It is not the same as the Hand guard with a frame, but it is not the same as the FirmlyGuard! However, it protects your fist from the wind and small stones. The area is small, but the way your hands get cold in winter is somewhat better than the No Guard. It is somewhat better than NoGuard in winter.
Because this is a universal product, it may take some time to install it. The installation method is quite simple, so there is no problem.
In the case of my CRF, Clutch Side was able to be installed easily. As for Brake Side, the throttle wire interfered with the product image, if you compare the photograph and the product image, you will understand, but I shaved a "mountain".
I made it easy with Grinder, but the Material is so soft that I think I can get away with hand saws and File.
By installing it, you can get more volume in the car and the off-road feel is much better.
The price is low, and it can be installed with a little effort. The color is also available in each manufacturer's image color, and it is recommended.View Detail
Used in the SEROW225 for mountain play.
I'm going to throw it uphill hard and hit the trees.
AluminumGuard to protect the Brake/ClutchLever
It looked solid, so I installed it.
There are products that can be installed more Firmly on other manufacturers' products, but
The price is too high. It's supposed to be destroyed... hesitation
The price of this Poly sports product is not bad either.
So I was able to handle it with ease.
It's good for people who use it as a consumable item and separate it from the rest.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING