32.58 EUR
(5,310 JPY)
26.33 EUR
(4,291 JPY)
(19% OFF)
5 (5 Reviews)
Excellent
Expensive, but efficientIt increases efficiency by working in tight spaces
If we assume that the main tightening is done with a torque wrench, we can use a torque wrench to tighten up to the halfway point There is no need to spend
This CompactShort ratchet is useful for this small turnaround
Personally, I think this one has appeared more often than the regular size Ratchet
The one drawback is that it's small, but the price is quite respectable
Reviews For KTC 9.5sq. Compact Short Ratchet From Other Webike User
Excellent
Convenient to carry and easy to useAlways 6. 3sq. I use Ratchet Handlebar & Socket, but the Socket size of Preload Adjuster of Front suspension is 17 mm and 6. 3sq. Because it can not deal with Size, for cars 9. 5sq. I bought Ratchet Handlebar.
Body is Small and light, so it is convenient to load during Touring and Circuit driving.
Ratchet movement is also light and easy to use, so I will use it even in regular maintenance.View Detail
Excellent
Small and usefulWe purchase Short ratchet of this Compact and lightweight here because we always carry the necessary tools for Touring..
I can store it in SMART in the Tool Bag, so I think that it can be stored without trouble there also Motorcycle where there is an on-board tool holder etc.
The feeling of use is like Kusutai KTC. I think that it is superior to the feeling of use as Compact but inexpensive Large Kimena Ratchet Handlebar.
Since Motorcycle has many Screws that are not torque to such a place, such as narrow places and exteriors, I plan to buy it for carrying and it is also active in regular Maintenance. It is a product that I think I want two for carrying and for keeping it in a tool box.View Detail
Most Viewed Reviews Of KTC Ratchet Wrenches
Excellent
Tool OrderThank you, I received my order today, well packaged and clean. Delivery in less than 10 days (France), nothing to say, I will place another order without hesitation. Thank you Webike - joanView Detail
Excellent
Excellent Ratchet This Ratchet has a high quality luxurious feel. I have used twice since recieveing more than a week ago and find myself reaching for it between projects just to appreciate the feeling of it in my hand. This tool is very useful in tight spaces working on the back of the engine block between the block and firewall, or underneath the windshield cowl. The swivel provides a favorable angle, and the ratchet offers low backdrag and lots of leverage. I am on the east coast of the USA and DHL delivered this package in only 36 hours. Webike is an excellent vendor. View Detail
Excellent
Great Japanese quality with no frills. WHy Webike has no photos of this ratchet is a mystery to me so I did include a couple here. This is my favorite style of flexhead ratchet with no detents in the flex joint and just free flowing movement. It has 36 teeth so it offers 10deg of movement between clicks. This ratchet has low backdrag and great feel in use. If your not looking for a high tooth count ratchet I can highly recoment this one. View Detail
Very Good
Handlebar feels good with 90-degrees rotationI bought it because it can be tightened and seems to be able to be turned quickly at the clamping place.
It has replaced the ordinary Ratchet wrench and is now one of the Main tools.
About 55 Nm (Axle Shaft) is the upper Torque value I have used, but
We have been able to use the system without any problems.
I guess the fact that the handlebar turns more than 180 degrees is the selling point.
The handlebar swings in both directions even when it is straightened for fast turning, so it is difficult to turn the handlebar during fast turning.
The ratchet part can be maintained (parts are available), so it can be used for a long time.
It is good for those who are looking for a Ratchet wrench in the future.View Detail
Excellent
The switching lever may be difficult to turn…I bought the KTCSwivelRatchet because it was the right length.
The total length is 180mm.
Overall, it's good, but Quantity:Pair (for Left and Right) The height of the switching lever is too low to turn it quickly.
It might be a little annoying…
Quantity:I have to turn it like I'm pushing the toes of my 2pc fingers to switch it.
Is it just a matter of getting used to it?
I can turn the Straight SwivelRatchet quickly, though.
However, I haven't used Straight's SwivelRatchet because its length is too short.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING