24.11 EUR
(3,930 JPY)
19.76 EUR
(3,220 JPY)
(18% OFF)
5 (10 Reviews)
Very Good
Not suitable for ScooterBuy for tzr50r Plug replacement. Bring it to the vertical engine, but it is somewhat unkind to Soroter's Horizontal Type. I think that it is necessary for ns-1 or nsr 50.
Reviews For KTC Plug Wrench Short From Other Webike User
Very Good
A parallel two-cylinder 2Cycle can reach it!I purchased this product to use for R1-Z.
So far, I have not had to replace the plugs on the road, but I have a set of plugs and this Wrench tucked under the Seat.
Please note that if you have a parallel TWIN 2Cycle, it has a shape that can be used donpically, but if you have a 4Cycle or other Plug in a secluded location, it is almost impossible to use it.
In this case, we recommend a SocketType Plug wrench with Rubber inside to keep it from falling off.
This Wrench has a notch that allows the Plug Cable to be inserted even in tight spaces.
It is convenient to have one because it is not hexagonal and can be tightened little by little.View Detail
Excellent
A must-have for any 2-stroke motorcycle riderMany 2-stroke motorcycles have a plug sticking out of the engine, so it is easy to access the plug by looking through the engine from the side.
If it turns round and round with Wrench etc. without using the Plug socket etc., it is possible to remove immediately, but when it roams with Net, it finds this commodity which seems to be more convenient, and purchases.
Normally I would buy a tool that I can use for a variety of things, but this product is a tool for removing and installing the plug, and it's not a cheap 100 yen 200 yen tool, it's over 2000 yen. But when I actually used it, I wondered why I hadn't used it before! But when I actually use it, I wonder why I didn't use it before!
If you have a 2-stroke motorcycle and want to make maintenance a little easier, we recommend you purchase this product as soon as possible.View Detail
Excellent
Anyway, it's easy to use.I bought it for a HusabergTE125 Plugfor Replacement.
It's very easy to use because it's easy to turn in tight spots and apply moderate force. It's not too long, so it's hard to damage the Screw hole of the plug by overtorque. It is also a point that there are
View Detail
Excellent
You can use it even if the space around the plug is narrow.? 【What made you decide the purchase?】
Even if the space around the plug is narrow, it is structured to fit in the plug.
? 【How was it actually used?】
As expected, Wrench caught tightly in the plug.
? 【Was it difficult to install? (Hard parts case)】
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
? [Is there anything I was disappointed about?]
Nothing in particular.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I think that it is more likely to be plugged even in a place where the overall thickness is a little thinner.
? 【Have you compared items?】
DRCRatchetBragWrench
? [Others]
I'm happy if the price is a bit cheaper.View Detail
Excellent
Easy to use!NSR250R (MC21) It is a very useful item for Rear bank's plug exchange.
Removing the Right Side 's Reserve tank, it is narrow, but you can swap it by holding hands from the gap.
It was a bit of time to take off the Fuel Tank outdoors as it became dark especially at the time of Touring..
It is very useful when it is called.View Detail
Most Viewed Reviews Of KTC Plug wrenches
Excellent
NGK.DENSOPlug either is acceptableThere is another Plug wrench, but the size did not fit, so I bought the size that fits.
KTC is safe and secure, and there are no problems with its use.
It is almost never replaced, so it will last a lifetime.View Detail
Very Good
A parallel two-cylinder 2Cycle can reach it!I purchased this product to use for R1-Z.
So far, I have not had to replace the plugs on the road, but I have a set of plugs and this Wrench tucked under the Seat.
Please note that if you have a parallel TWIN 2Cycle, it has a shape that can be used donpically, but if you have a 4Cycle or other Plug in a secluded location, it is almost impossible to use it.
In this case, we recommend a SocketType Plug wrench with Rubber inside to keep it from falling off.
This Wrench has a notch that allows the Plug Cable to be inserted even in tight spaces.
It is convenient to have one because it is not hexagonal and can be tightened little by little.View Detail
Average
Lightweight and easy to use[How is it used?
Purchased because I could not find OEM supplied tools.
There is a Rubber inside, and when the tool is pulled out of the Plug hole, the Plug can be pulled out together.
The same is true when installing the plug, which allows the plug to be dropped deep into the hole to minimize the risk of damaging the electrode.
Was the one you received as per Image?
Yes
How was your experience with it?
Easy to use
[Points to note]
None
How did it compare to other products?
Lighter than OEM
▼ Other items that would be helpful include
Is the unit production cost 10 yen?View Detail
Excellent
Ideal for on-board toolsI use it as an on-board tool for my KawasakiZ1.
It is a cheaply built but very easy to use plug wrench.
This compact size is perfect for the Z1, which has less luggage space under the seat.View Detail
Excellent
I'm ready for my first DIY Plug replacement in about 30 years.When I was a student, I used to replace the Spark plug myself, but after I started working, I had the shop replace the Spark plug when they inspected my car.
I've been thinking about it for a while now, so I decided to replace it myself, but since it's the first time in 30 years that I've done it myself, I bought a reliable tool to avoid trouble.
Especially, since there seemed to be the one that Screw precision was bad for the B-RiskPlug being installed...I really want to avoid Trouble at the time of removal.
The Magnet holds the Plug firmly in place and I was able to work reliably.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING