?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
<Mounting vehicle> '03CB1300SF
<Mounting environment> OEMBar handle - OEMThrottle - Superbike Grip - Brake only Nichinomi Industrial Radial master - It is Bikini cowl of MotoZoom. (Originally it was Hardy 's MID bar, but if interference was returned to the OEM bar with many interference, interference sites decreased)
<Installation process> Until now I have replaced several types such as OEM and POSH Mirror, but started to shake from 80 kilometers per hour, changing the Bar handle, changing the Bar End, changing the Bar clamp did not work out whether to change Bar handle. Originally I wanted this Mirror but Quantity : Pair (for Left and Right) After arranging it was postponing because the price is price. (There are things that I installed in the past as a medium accident car in the past, but I have given up halfway)
<Try to install> The place I bought and bought this time, I tried out about 200 kilometers per hour, although it was about 5 minutes as I could think that the thing spent on vibration measures until now seems stupid completely, but it did not blur at all. Also, although it was Foldable to absorb the bumping impact, it never slept with wind pressure. In addition, like the Red circle in the photograph, I interfered with the bikini and was prepared to be able to get a huge vibe, but since it was not a problem at all, I was impressed as myself.
<Mounting> Since I am installed in Nisshin Radial master, the position is different from OEMMASTER and the Mirror mounting position is on the Bar handle and interferes with the bikini, but I think that it is OK if it is OEMMASTER. In fact, Clutch master remains as OEM but there are no interference points and the adjustment range is secured. (height - body weight - Riding Positionetc. There are some reference levels) There are several kinds of OffsetHolder of the company, so if I use it I think that I can escape further interference, but my
<Antiglare> When waiting for a signal in the evening, four wheels of LEDheadlight came over with a following car, but glare was suppressed enough to be tolerable in Clear shield.
<For reference> Fixed (Retightening) Even though it's Hexagonal Wrench, I think it's better to prepare Hexagon socket and Ratchet wrench for installation as it is hard to get power. (8 mm and 6 mm) It comes with a cheesy Hexagonal Wrench, but we recommend that you prepare for the color of the supplied Bolt Black as well. Because the weight of Mirror is heavy, if you do not tighten it snugly it moves with just a touch.
<Summary> Because I will use capital gold with priority on key things such as Exhaust System, I was merciful to say that blurring is not fixed at low budget. Those who are suffering from blur, the price is not cheap, but the value worth trying is in Large. Range of movement - I think working place is also many and usability is good.
下單出貨到收貨都十分迅速, 產品質量如預期一樣的好, 以後會繼續光顧Webike.
購買前有擔心這通用件是否適合我的2022' Honda CB300R安裝, 幸好合用, DIY也能順利完成.
由原廠塑料後照鏡升級換裝後, 整車觀感也稍有提升.----------------------------------------------------------The order is very fast to place the goods to receive the goods. The quality of the product is as good as expected. In the future, we will continue to visit Webike.Before buying, I was worried about whether this union is suitable for my 2022 'HONDA CB300R installation. Fortunately, it can be completed by DIY.After the original plastic rear lens is upgraded and replaced, the vehicle view also improves slightly.Powered by Google TranslatorView Detail
This is my first time web shopping from WEBIKE, this Shark mirror is fit my grom/msx (10mm) bolt and easy install, it's all made in metal, so heavy weight is not racing style, around 620g per pcs. Made in high quality with free angle for setup, glare-less sight function, that's why I choice this item.View Detail
It was the first time I bought items from Webike. The conditions when I received the item was pretty good. It surprised me a little bit because I thought it was a pair of mirror but it turned out to be a single mirror. To mounting the mirror does require some efforts (especially to fit it in a good direction). I mounted it on my scooter but it appeared that it is designed for sport bike because it was a bit protruding too wide on my scooter. The clarity of the mirror is good under any circumstances but it is a bit expensive to buy a single mirror for that price.View Detail
I bought this because the OEMMirror on my Z125PRO is hard to see!
The product is good, but expensive and heavy.
SizeOver for MINI?
At any rate, it's easier to see than NORMAL, so I'll just keep it on.View Detail
It goes well with Naked type Motorcycle.
The shape is parenthesis good, the visibility is good and I'm glad I bought it.View Detail
아주 클래식하고 예쁜미러입니다다만 좌우가 회전방향이 같아서 설치시 주의가 필요합니다시야는 아주 좋습니다 위아래좌우로 움직이기도 합니다다만 관저링 많아서 한번 세팅하기에 조금 신경쓸부분이 많습니다무엇보다 크롬디자인이 아름답습니다View Detail
I watched the video of Bike YouTuber 46 and bought it because the shape was so pretty. However, the price per product is too high. Also, the mirror viewing angle is bad compared to the original. It's very good as far as the design is concerned.View Detail
+1Fits: HONDA CB500X , HONDA CB300R , HONDA CB500F , HONDA CB150R , YAMAHA XSR700 17-21
About quality:Only rode at a max of 110+km/h. Clear view up till 90km/h, slight blur beyond that but nothing too drastic. However my bike is known for having higher than usual vibrations. Take note, I also installed it myself.About aesthetics:Bigger than other bar end round mirrors, giving good field of view, however doesnt look out of place.About installation:Easy to install. Google translated the manual. Expanded the collar(sleeve) thingy to fit it in my handlebar of outer diameter=22mm. As you orientate your final chosen position of the mirror, make sure the stem+ball joint is not pushed to the extreme to one side, as the clamping force on the ball joint will be reduced and cause mirror to droop. I made that mistake the first time but after correcting, riding at 110+km/h for 45 mins straight did not affect the mirrors.After usage of a few months:Very minimal rust built up only on the one big screw as i assumed its the only one able to collect a bit of water in its hexagonal socket head. However considering i park outdoors and it was monsoon season in Singapore + hardly clean my bike, it held up super well!View Detail
Great visibility, low profile and very high quality and look great. Also unique where I live.. very happy with these mirrors!View Detail
This mirror is an excellent choice, particularly due to its wide lens that offers a broader field of view. It fits perfectly, ensuring a seamless installation. Additionally, it remains stable with no vibrations, even at high speeds, making it ideal for highway driving and ensuring clear visibility at all times.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING