Installed on TouringSEROW.
Wiring, for example, was done without hesitation, referring to information on Net. The rest of the process, such as the extra wiring, required Sense, and I managed to put it all together nicely, even though it was a bit of a puzzle.
When I was checking for any abnormalities at the end, to my surprise, Axel's rotation was stuck!
Apparently, the grips were longer than the OEM grips, and the grips were interfering with the handlebar attachment point on the TouringSEROW equipped hand guard.
It's got a corn expander, but...
There is no choice but to use WasherQuantity between Hand guard and Cone Expander.:1 Set of 2pc. was found and resolved successfully!
The actual Heater, as seen in the previous reviews, is quite warm, and Level 1 of 3 levels is about enough.
We are in a snowy area and don't ride in the winter, so it will be useful in early spring or late fall.
- Instock
124.36 EUR (21,450 JPY)
Delivery Information
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
WR250R
07-17 (3D7H)* The heat spot on the right side is not on the fingertip but on the palm of the hand, so you may feel the temperature difference between the left and right side.
-
WR250R
07-17 (3D7J)*The heat spot on the right side is not on the fingertip but on the palm of the hand, so you may feel the temperature difference between the left and right side.
-
WR250RX
07-17 (3D71)*The heat spot on the right side is not on the fingertip but on the palm of the hand, so you may feel the temperature difference between the left and right side.
-
WR250RX
07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand, so you may feel the temperature difference between the left and right side.
See all
YAMAHA
Product detail
[Manufacturer's Part Number] Q5KYSK063Y40
**As using the Grip Warmer, please make sure to wear gloves.
*Do not use the Grip Warmer on the high power setting when the outside temperature is above 20°C.
*As the grip is worn out or damaged, stop using the grip warmer and replace the grip.
*MT-07 has a 10% higher throttle specification than the standard.
*For SCR950, please operate the controller after starting the engine.
*XT250 / XG250 has a heat spot on the left side that is located on the palm side of the hand instead of the fingertips, so you may feel a difference in temperature between the left and right sides.
*For XT250 / XG250, Cone Expander GH (Q5K-YSK-041-E16) is required as installing a handlebar guard on.
*Please prepare the rubber adhesive which is required as attaching the left grip to the handlebar..
For winter comfort and easy grip!
It has been designed exclusively for YAMAHA vehicles for smart installation without modifying the vehicle's wiring.
[Product Description]
・Specially designed for YAMAHA vehicles for smart installation without modifying the vehicle's wiring
・Integrated tubular throttle structure provides the same grip thickness as stock grips and it is the world's smallest diameter grip with heater function *According to the manufacturer
・By using the stainless heating elemet ensuring even heating, it holds high durability.
・The output setting is a simple 3-way push-button system (Hi, Mid, Lo) (Each output level can be set arbitrarily in 10% increments)
・Automatic adjustment of heater output in response to battery voltage.
・Safe design with battery protection.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250R
- WR250X
- XT250X
- XT250X
- XT250X
- XT250X
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- XSR700
- XSR700
- XSR700
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- XSR900
- XSR900
- XSR900
- XSR900
- XSR900
- BOLT C Spec
- BOLT C Spec
- BOLT C Spec
- BOLT C Spec
- BOLT C Spec
- BOLT C Spec
- SCR950
- SCR950
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Apr 10, 2022
Fits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Oct 3, 2021
Here are my thoughts on the installation
It hasn't gotten cold yet, so this will be my impression of the installation, not the use!
This time, it was installed in SEROW250!
The most difficult part is to take out the Connector which connects Wiring and put it back in the original position.
this [Color] If you can clear it, the rest is easy.
Fits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Feb 14, 2021
Although the technology is a beginner, it is very easy to install and has excellent performance. It's not uncomfortable off-road, it's not broken. I think it's the right quality for the price.
View DetailFits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Nov 21, 2018
Recently it is essential equipment ? ? ?
Approximately 15 ° C after switching off (No gut w)
Recently it is almost indispensable equipment. I can not get on to no more Motorcycle ww
Honda's Sports Grip Heater also has Button's position at a discreet
It is good, but it is difficult to understand how many steps are in now.
Because Yamaha's Grip heater is a separate switch
It is good to see by checking where you are in three stages now.
Even though it is said to be Large, it is discreet and is attached to the root of Mirror
So it does not get in the way.
Fits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Oct 31, 2018
Large success quickly, it was correct and installed.
With this we can ride comfortably this winter as well.
I also considered the Type with Switch in Grip of Other Brand Product, but the product I used before was difficult to operate and it was hard to see the display, so this time I made it as a separate Yamaha OEM Product.
New Custom Articles
